Fcs2 Thomas Bexon Signature Fin - Volan

 Thomas Bexon's new signature single fin holds the perfect amount of release and drive.

Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.

Speed & tight turns. Ideal for beach breaks.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Balance of speed, flow and response. Suitable for all conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• New Linear Flex: 3D Twist and roll action delivers a smoother feel.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core Carbon

Our new PC Carbon construction with ‘Linear Flex’ produces a 3D twist & roll action resulting in a fast, super responsive fin that feels much smoother through turns. PCC fins suit fast surfing and are favoured by more advanced surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Speed, flow and response with added control. Excels in critical conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response with added control.
• Oversized, all-round template with a fuller tip.
• Ideal for surfers who like to attack the wave and perform aggressive turns.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

What happens when you take a longboard and make it shorter, and re-distribute the foam into the outline and thickness? Answer, you get the Modern Double Wide. This high volume mid-length surfboard offers great stability and exceptional paddle power for beginner-to-intermediate surfers.

OUTLINE: Generous nose outline up front with parallel rails, leading into a wide tail. Having maximum surface area gives this surfboard amazing side-to-side stability so it’s perfect for beginner and intermediate riders as they jump to their feet.

CONTOURS: Flat through the nose helps with early entry into softer waves, vee into double rolled concave in the back half of the board means more capable riders can still make flowing directional changes.

ROCKER: Relaxed through the entire length of the board with gentle lift in the nose and tail. This allows the board to paddle exceptionally well, catch waves easily, and maintain forward flow even in the white-water, while still allowing the board to turn in a smooth arc.

FOIL: Boxy rails and a high-volume foil from nose-to-tail means this board will sit high on the water making it perfect for maintaining speed and distance in smaller conditions.

PERFORMANCE: Built using our SLX construction which produces a light, responsive, versatile surfboard that is very sensitive under foot and rides well in a wide variety of conditions

Available in two key sizes, the Modern Double Wide is perfect for anyone looking for the stability and paddle power of a longboard in a more manageable size board.

Technical Infomation

The Huevo, in SLX construction, is a classic hybrid surfboard that incorporates the best of both the shortboard and longboard. It’s round nose and fuller tail gives plenty of floatation and makes paddling a breeze. With its shorter length and 2 + 1 fin set up makes for fast responsive turns and manoeuvrability.

OUTLINE: Its fuller outline with the wide point slightly forward of centre means you can trim and glide forward on the board, adds to the great paddle power and to the stability and flow, while its round tail makes for smoother transitions between turns.

ROCKER: With emphasis on being an all rounder it has a low to medium rocker, this is why you will find this board paddles with ease and flows through those dead sections with minimal effort. A slight lift in the nose makes those late take offs easier and the slight lift in the tail makes for nice drive through your turns.

CONTOURS: A nice classic slight rolled Vee from nose to tail makes it effortless for those rail to rail transitions, while the stance is anywhere on the board, however getting back over the fins the board will turn on a dime.

PERFORMANCE: Think summer grovely beach breaks when you don’t want a Longboard or it’s too small for your Shortboard or winter reefs and perfect points. This board can handle anything from waist to double overhead and any ability from beginner to advance. Enjoy

SPECIFICATIONS

NOTE: rider weight is based on board volume and intermediate rider skill level.

TECHNICAL INFORMATION

Construction SLX Epoxy Construction

SLX construction produces a controlled flex pattern by combining the versatility of epoxy materials with the added advantage of reduced weight. All SLX boards have an EPS core with a high-grade timber stringer, which is laminated by hand using epoxy resign, biaxial fiberglass and a specialized construction process.Featuring a high strength-to-weigh ratio, and designs CNC milled directly from the shapers files. SLX boards feel light, responsive and are very sensitive under your feet. These boards are extremely versatile, easy to ride, and can be used in wide variety of conditions.

Board Contours Vee Concave

Rail Neutral Rail

Wave Height 1-8ft Waves

Surfer Skill Level Beginner, Intermediate, Advanced

ALL THE TRICKS IN THE BOX