Red

Yeti Roadie 32 Wheeled Cooler - Core Colours

ROLL FROM BOOT TO BASECAMP AND BEYOND.

The YETI Roadie 32 Wheeled Cooler is maneuverable, durable, and small-vehicle boot compatible making it ready to navigate tailgate crowds, long road trips, and weekend tournaments. This wheeled cooler has the same cold-holding power and durability you’d expect from a YETI® Tundra® Cooler with added mobility. It’s also going to last just as long thanks to its RockSolid™ Strength body construction – from the durable handle to its rugged wheels, this thing is virtually indestructible. This Roadie™ 32 Wheeled Cooler comes with one dry goods basket.

NEVERFLAT WHEELS
Solid, single-piece tyre construction is impact and puncture-resistant

LIPGRIP HANDLES
Stay out of the way and make carrying your provisions easy

BEARFOOT NON-SLIP FEET
Prevent sliding on the boat or in the backseat

PEOPLE ARE ASKING:

WHICH SIZE ROADIE  WHEELED COOLER SHOULD I BUY?

For small group day outings and shorter excursions, the compact Roadie 32 Hard Cooler is a great choice. For bigger groups and gatherings that require a lot of provisions, the Roadie 48 or 60 Wheeled Cooler will do the job.

HOW MANY CANS WILL FIT IN MY ROADIE 32 WHEELED COOLER?

Without ice, the Roadie 32 Hard Cooler holds 50 375ml cans.

HOW MANY BOTTLES OF WINE FIT IN MY ROADIE® 32 WHEELED COOLER?

14 Bottles of wine

HOW DO I CLEAN THE ROADIE® 32 WHEELED COOLER?

For general cleaning we recommend using soap and warm water. For a more thorough cleaning and problems with strong odors, use a solution of warm water and bleach (6:1 ratio) with a sponge or mildly abrasive rag. Odors can easily get trapped in hard to reach areas such as around the gasket and drain plug, so be sure to thoroughly scrub those areas. For tough stains and very foul odors, we would recommend heading to a local do-it yourself car wash and cleaning your YETI® Roadie® Cooler with a high pressure soap spray.

WILL THE ROADIE 32 WHEELED COOLER FIT IN THE BOOT OF MY CAR?

Roadie 32 is designed to fit in most midsize and full size sedan boots. It may not fit in compact sedans.

EXTERNAL DIMENSIONS
54 0 W X 41.0 D X 46.4 H CM

INTERNAL DIMENSIONS
39.8 W X 21.9 L X 34.2 H CM

EMPTY WEIGHT
11.1 KG

Yeti Tundra 65 - Core Colours

Yeti coolers are at home on the dock, at the beach, in the blind, or on the boat, and the Tundra 65 is no exception. Just as adept at keeping your catches cold in the field as it is storing the drinks and food for your backyard barbecue, this ice chest is plenty roomy, holding a limit of redfish or your prized brisket. Whatever you choose to chill, this top-quality cooler beats out all other premium coolers by keeping your contents colder for longer, with up to 3 inches of PermaFrost Insulation and our ColdLock Gasket.

Keeps a camping weekend for four, moonlights as a casting platform, and holds the cold on triple-digit days.

Great for small gatherings and weekend events
Versatile use options, like tailgating, fishing and hunting
Works as a casting platform

NOTE: All Tundra models come standard with one dry goods basket.

FATWALL™ DESIGN

Extra-thick walls hold up to two inches of insulation for unmatched ice retention.

PERMAFROST™ INSULATION
Pressure-injected commercial-grade polyurethane foam in the walls and lid makes sure your ice stays ice.
ROTOMOLDED CONSTRUCTION
Makes it armored to the core and virtually indestructible.
 
T-REX™ LID LATCHES
Heavy-duty rubber latches are made with patented technology so you'll never see another busted latch.

ANCHORPOINT™ TIE-DOWN SLOTS
Molded tie-down slots for easy mounting to your boat, trailer, or truck bed.

NEVERFAIL™ HINGE SYSTEM
Two hinge pins and interlocking design prevent the hinge from ever breaking.

INTERLOCK™ LID SYSTEM
Creates a form-fitting barrier against the heat.

COLDLOCK™ GASKET
A freezer-quality gasket circles the length of the lid to block out the heat and lock in the cold.

LIPGRIP™ HANDLES
Stay out of the way and make carrying your catch seem less of a chore.

EXTERNAL DIMENSIONS
78.2W X 43.9D X 40.6H CM

INTERNAL DIMENSIONS
59.2W X 27.2D X 28.7H CM

EMPTY WEIGHT
13.7 KG

Mick Fanning Twin Town - Cedar

This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance.  Tri-fin set-up.

FINS: 3 Fins supplied – Futures template F6

CONSTRUCTION

Appealing to those who are looking for more volume and better glide than a funboard, but aren??t interested in a full-size longboard. Great performance in thigh-high to slightly over head-high waves, this board is a tremendous wave catcher.

A low entry rocker gets you moving and provides the glide needed on smaller, weaker days. We packaged just enough tail rocker to allow it to perform in quick beach breaks or as the surf increases.

Specs.
Level - 1 > Expert.
Wave Height - 2 - 6ft.
Dimensions - 8'0" x 22" x 3".
Recommended Rider Weight - 60-110kgs / 130-240lbs.
Volume - 60.0 ltr.

This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance.  Tri-fin set-up.

The fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing.

FINS: 3 Fins supplied – Futures template F6

CONSTRUCTION

Torq Mod Fun - 7'6"

From gliding and tip riding, to surfing in powerful conditions, the requirement for a modern longboard is versatility. Our design delivers, covering all terrain. From young to old, new school through traditional styles, first wave rides to decades of experience.

With low entry rocker and full outline you'll find a board that glides in the small stuff and can be ridden from the front. Progressive surfers will find a quick midsection, slightly pulled tail, with enough release to keep the board fast and loose. 2+1 fin set up.

Specs.
Level - 1 > Expert.
Wave Height - 2 - 6ft.
Dimensions - 9'0" x 22 3/4" x 3 1/8".
Recommended Rider Weight - 60-120kgs / 130-260lbs.
Volume - 72.0 ltr.

Torq Tec Big Boy 23

This is a funboard on steroids! For this concept Torq used the overall plan shape of a minimal/funboard and boosted the width and volume along the length and foil. The result is a manageable, easy turning length with the paddle and float of a much larger board.

For improving surfers, this offers stability, paddle power and wave catching ability. For heavier surfers you'll find the float you need in a much shorter length. The single to double concave means you can still put this board on a rail.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions:

6'10 x 22 1/2 x 2 7/8 49.1 l
7'2 x 22 3/4 x 3 53.7 l
7'6 x 23 x 3 57.5 l


Technology:

Since 2012 Torq have developed a name for industry leading Epoxy technology, offering performance and durability for the premium recreational surfer. By using optimised techniques widely used in composite technologies the TEC range takes that one step further; creating a board with an incredible strength to weight ratio and torsional flex properties.

The Torq Epoxy Composite (TEC) uses a 3 x 6oz lay-up and carbon fibre tail reinforcement on the deck for maximum strength. The bottom features a carbon torsion strip to control flex and give a responsive spring from turns.
This ground breaking technology has been applied to our user friendly performance shapes used in the Torq PU/Polyester range, to produce a truly high performance range of surfboards with unrivalled durability.

Torq Tec Big Boy 23

This is a funboard on steroids! For this concept Torq used the overall plan shape of a minimal/funboard and boosted the width and volume along the length and foil. The result is a manageable, easy turning length with the paddle and float of a much larger board.

For improving surfers, this offers stability, paddle power and wave catching ability. For heavier surfers you'll find the float you need in a much shorter length. The single to double concave means you can still put this board on a rail.

With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

Dimensions:

6'10 x 22 1/2 x 2 7/8 49.1 l
7'2 x 22 3/4 x 3 53.7 l
7'6 x 23 x 3 57.5 l


Technology:

Since 2012 Torq have developed a name for industry leading Epoxy technology, offering performance and durability for the premium recreational surfer. By using optimised techniques widely used in composite technologies the TEC range takes that one step further; creating a board with an incredible strength to weight ratio and torsional flex properties.

The Torq Epoxy Composite (TEC) uses a 3 x 6oz lay-up and carbon fibre tail reinforcement on the deck for maximum strength. The bottom features a carbon torsion strip to control flex and give a responsive spring from turns.
This ground breaking technology has been applied to our user friendly performance shapes used in the Torq PU/Polyester range, to produce a truly high performance range of surfboards with unrivalled durability.

The Walden MAGIC Model stands the test of time due to its versatility and unique design features. With an emphasis on performance, with a single concave running from the nose through to the midpoint creates lift and stability, which is perfect for controlled nose riding. 

***Fins Not Included

Torq Tec Delpero Pro Model - 9'1

EDOUARD DELPERO PRO

SMOOTH PROGRESSIVE LINES AND CRITICAL NOSERIDES