Solarez

Size
  • Sponge Rez Body Board Repair 15ml

    Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. 

    Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. 

    Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.

    General Directions:

    1. Surface should be clean, dry, and free of dirt, and or wax.
    2. Use in well ventilated area, preferably outdoors. DO NOT deliberately inhale vapours – don’t be stupid.
    3. Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
    4. Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.

    $12.99
  • Solarez Epoxy Ding Repair Kit 30 Ml

    Wh

    It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.

     

    UV-CURE (for superficial dings less than 1/4″ deep)

     

    1. Apply in the shade.
    2. For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
    3. Expose to sunlight for 3 minutes
    4. Peel off plastic wrap and touch-up sand.

    $34.00
  • SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.

    • No mixing necessary. UV curing assures complete hardening.
    • Provides complete crosslinking
    • Remarkably tough and resilient
    • Contains urethanes that keep from yellowing
    • Eco-freindly ZERO vapors, non-flammable.
    • Comes with 60/240 grit sand pad.

    $44.00
  • Solarez Epoxy Pro Travel Kit

    • Zerovoc ® Styrofoam-safe UV cure resin
    • 2-part epoxy resin for internal structural repairs
    • Solarez Microlite-Epoxy for foam repairs
    • Fiberglass cloth
    • Rope
    • Stainless Steel Scissors
    • Sandpaper
    • Eco-Friendly Clean Up Solvent
    • Applicators

    All in a crush-proof travel box.

    $120.00