Curve

Get your wetsuit on easily with the Slug wetsuit foot bag

The SLUG Wetsuit Easy On - Foot Bag is for anyone who wants to get into their full length wetsuit easier and quicker. The slippery durable construction enables your feet to slither their way through the narrowest, tightest fitting wetsuits with speed, at the same time reducing stress and rips on your wetsuit.

There's nothing worse than sapping all your energy getting into a wet wetsuit, and wet wetsuits are notoriously difficult to get into as the wet neoprene grabs onto your skin, rather than letting it slide past.  The good thing about the Slug is that it works great on a suit whether its bone dry, not quite dried off, or completely sopping wet..... to help you get into your wetsuit fast, and into the surf quicker.

Works with booties too! Put your booties on first, then apply the slug, then get into your wetsuit as per normal (with slug over the bootie). This technique is great if want to avoid skin contact with your foot on the freezing carpark ground, by allowing you to bootie up before getting out of the car.

As the proud owner of a Slug you can now share it with those less fortunate in the car park of your favourite break, in exchange for wax and sunscreen of course.

slip into it!

Features

• slipping your big old feet and hands through tight wetsuits has never been easier or faster!
• awesome for anyone who struggles to get into a tight fitting wetsuit 
• awesome for getting into a wet wetsuit or wetsuit that hasnt completely dried
• helps prevent damage from stretching neoprene
• eliminates kooky wetsuit battles 
• made from slippy, durable, ripstop nylon 
• compatible with booties  

 Dont waste time and energy.....get your slug on.

Hawaii Hula Dashboard Bobble Doll 

You drive, she sways! 

With her infectious ‘feel good’ vibe, Curves iconic Hula Girl is like an instant good day pick-me-up, that will bring your car to life.

She’s super fun and ready to share your journey. The more bumps on the road the better….. because your driving motion transfers to a hidden spring under her skirt, so she sways as you drive!

Using a hand sculpted mould, the figure is crafted from resin and painted by hand. Standing 13cm tall this stunning hula girl keeps it traditional with a natural grass skirt, ukulele and beautiful Hawaiian lei 

Put some hula sway in your driving day!

Instructions

Choose a clean, dry and flat surface

Peel adhesive backing and press firmly into place

Caution

Do not position where driver view can be obstructed

Do not position near or on airbags

Curve Aero Roof Rack Pads will fit most aero type roof racks. When we were unable to get a roof rack pad to fit aero style bars we commissioned and helped Curve Surf to design these pads.

Built from high density moulded foam wrapped in a durable, weather resistant nylon outer, these pads are mounted on the tops of aero roofracks, with full length heavy duty Velcro wrapping under the bar to fix the pads in place.

maximum lockdown, minimum size

The 'mini-me' of Lockdown racks, we've made the Curve travel racks as small as possible to squeeze into your boardbag or luggage when traveling overseas. Losing your boards off the roof is the last thing you want after getting them safely to the airport, but most rental cars don't have fixed roofracks which means that plain tiedowns wont do the job. So we've built full softrack performance into a compact size by eliminating the bulky foam padding (seeing as your surfboards will be in protective boardbags anyway). With Curve travelracks you can relax knowing your boards can be safely secured via the lockdown system to any vehicle with a roof - without having to pay fees for carrying too much luggage!

Features
-downward force system virtually eliminates surfboard movement.
-conveniently sized to take up minimal space.
-mini-squabs protect vehicle roof and boards at contact points.
-3 connection methods: thru doors, loadbars or gutters/sills.
-quick and easy to use with single tightening point.
-breaking strain tested to 350kg.
-fit any vehicle with a roof.
-webbing doesn't run along roof so less potential for damage.
-easy board access via top load hook.
-holds 1-6 shortboards or 1-3 longboards.

Curve Euro Roof Rack Pads are designed to wrap around standard Thule, Prorack and other square shaped bars.

Built from high density moulded foam wrapped in a durable, weather resistant nylon outer, these pads are mounted around square shaped bars, with full length heavy duty Velcro wrapping under the bar to fix the pads in place.


Suitable for Surf boards, longboards or anything you need to give extra protection to during transportation.

Curve Aero Roof Rack Pads will fit most aero type roof racks. When we were unable to get a roof rack pad to fit aero style bars we commissioned and helped Curve Surf to design these pads.

Built from high density moulded foam wrapped in a durable, weather resistant nylon outer, these pads are mounted on the tops of aero roofracks, with full length heavy duty Velcro wrapping under the bar to fix the pads in place.


Suitable for SUP, Surf boards, Kayaks, Windsurfers or anything you need to give extra protection during transportation.

The Surfboard Ceiling Rack / SUP Ceiling Rack is made of powder-coated black galvanized steel with a protective weather resistant foam to keep your board safe and secure

Utilising a 180 degree bend the COR Ceiling Rack securely stores and displays your Stand-Up Paddle Board, Longboards or Surfboards to the ceiling without the need for complicated straps or cables

Padding is made from high quality weather resistant EVA Foam

The COR ceiling rack will hold 1x stand up paddle board surfboard of any size, 2x longboards or 2-3x shortboards

Can also be used as a wall mount

Designed for both indoor and outdoor use

Easy to install, all hardware is included

Dimensions

Rack opening is 26.5cm (10.5") so enough room to accommodate more than one board (depending on board thickness).

Internal depth of the rack is 58cm (23")

Curve Soft Racks
maximum board protection

Quite simply the strongest, simplest and most protective soft racks you can buy. The patented 'lockdown' system uses a single loop to pull both roofrack and boards down onto vehicle roof, virtually eliminating boards lifting up and down or moving side to side. Lockdown provides secure protection against the most extreme conditions including weather, high speed and windblasts from oncoming trucks. 25mm foam padding protects surfboard rails and there are 3 vehicle connection options. In order to seek find and surf you need to get your equipment there in one piece so whatever you do, don't cut corners on your racks.

Features

-downward force system eliminates surfboard movement.
-3 connection methods: thru-doors, loadbars or gutters/sills.
-quick and easy to use with single tightening point.
-25mm foam padding protects surfboard rails and vehicle roof.
-fits most vehicles with a roof.
-easy board access via top load hook.
-luxurious padded neoprene bed for surfboards
-includes utility bag
-webbing doesn't run along roof so reduces potential for vibration damage to roof.


capacity: 1-6 shortboards or 1-3 longboards

Constructed from a multi stage anti corrosion process, these Curve steel surfboard racks are both lightweight and super strong. Surrounded in EVA cushioning foam to provide a soft landing for two surfboards up to 15kg each, you know they have the best possible protection.

there are two options for installing racks, they can be installed horizontally to hold surfboards on a wall, or they can be installed vertically to support surfboards floor standing.

compatible with shortboards and longboards.

Features

• multi stage anti-corrosion process
• super strong & durable steel construction
• black powder coated finish
• protective EVA foam padding for board protection
• set includes pair of racks plus installation screws
• stores 2 surfboards or longboards up to 15kg each
• arm length 60cm, base 29cm, space between arms 20cm
• Curve 12 month guarantee

SUP Wall Rack Double Aluminium by Curve

NZ Double SUP Racks 2 Stand Up Paddle Board Wall Racks (pair)

Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 15kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 2 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity easily supports 2 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

Features

• super resistant to rust and corrosion
• super strong & durable aluminium construction
• sleek sliver finish
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 2 Stand Up Paddle Boards
• arm length 59cm, space between arms 20cm
• Curve 12 month guarantee

Curve Surfboard Wall Rack Triple Aluminium 

Triple Surfboard Racks 3 Surfboard Wall Racks (pair)

Precision engineered made from rust-proof aluminium, this pair of Curve Quad Surfboard racks for 3 Surfboards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised Organise your surfboards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 10kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 surfboards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.  [note images are out-dated and show straight arms which is not accurate - arms on shipped item are at 10 degree angle]

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity easily supports 3 surfboards up to 10kg each with fins left on (plenty of space between levels)

Got less than 3 boards? check out our double surfboard rack options...

Features

• Super strong & durable aluminium construction
• Super resistant to rust 
• Sleek sliver finish
• Protective EVA foam padding for board protection
• Easy installation - arms insert with a simple push pin
• Set includes pair of two racks plus installation screws
• Stores 3 surfboards
• Arm length 48cm [19"], base height TBAcm [TBA"], space between arms 17cm 
• Curve 12 month guarantee

SUP Wall Rack Triple Aluminium by Curve

NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)

Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 15kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

Features

• super resistant to rust and corrosion
• super strong & durable aluminium construction
• sleek sliver finish
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 3 Stand Up Paddle Boards
• arm length 59cm, base height 54cm, space between arms 20cm
• Curve 12 month guarantee

Curve Triple SUP Steel Rack

Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)

Precision engineered from a multi stage anti corrosion process, this pair of Curve steel Triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty steel tubing that has been powder coated and treated to provide excellent rust protection.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 20kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space

Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity Easily supports 3 standup paddle boards up to 20kg each with fins left on (plenty of space between levels)

Got 2 or 4 boards? Check out our Double and Quad SUP rack options...

Features

• multi stage anti-corrosion process
• super strong & durable steel construction
• powder coated in black
• arms set at 10 degree incline to make boards extra secure and easy to load
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 3 Stand Up Paddle Boards
• arm length 68cm [27"], base height 66cm [26"], space between arms 30cm [12"] 
• Curve 12 month guarantee

Curve Quad Steel SUP Rack

Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)

Precision engineered from a multi stage anti corrosion process, this pair of Curve steel Quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty steel tubing that has been powder coated and treated to provide excellent rust protection.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 20kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space

Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.  Image shows the pair close together, install at a suitable distance apart.

Capacity Easily supports 4 standup paddle boards up to 20kg each with fins left on (plenty of space between levels)

SUP Wall Rack Quad Aluminium NZ by Curve

Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)

Precision engineered made from rust-proof aluminium, this pair of Curve quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely unnecessary!

Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 15kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity Easily supports 4 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

Got less than 4 boards? Check out our triple and double SUP rack options...

Features

• super strong & durable aluminium construction
• super resistant to rust 
• sleek sliver finish
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 4 Stand Up Paddle Boards
• arm length 68cm , base height TBAcm ["], space between arms 30cm 
• Curve 12 month guarantee