FCS
FCS Fins were introduced to the Australian market in 1992 and released globally in 1994. The first FCS plug was patented shortly after the global release and it quickly became the world standard for removable fins. To this day FCS is the strongest, most successful, and also the most widely used fin system in the world. Designed in collaboration with the world's leading surf athletes and surfboard shapers, the FCS fin range offers a diverse range of surfboard fins suited to a variety of board models, wave conditions and surfing style. As well as fins the also make Board Bag Covers, Leashes and Traction Pads.
-
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Almost intuitive in the way the H4 performs, when you initiate a turn, the fins will work for you by sullying speed when you need it, and then releasing at the ideal transition point.
While the science behind the template, the materials and the foils are highly complex, every component of this fin has been engineered to create a simple synergy between the fin and the surfboard, the rider and the wave.
UNIQUE TEMPLATE
Radically different side & centre fin templates create a powerful fin set with ultimate speed & drive.
SIDE FIN PROFILE: Lower section produces maximum acceleration, while hatchet like tip creates stability & control.
CENTRE FIN PROFILE: Highly raked elliptical outline reduces drag, and offers feeling of predictability when releasing through turns.
FIN FOILS TEMPLATE: Thicker base with tapered tip optimises flex & regulates the release of energy during rail to rial transitions.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
SIZES
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
$269.00 -
-
FCS Dual All Purpose Cover
Features.
Lightweight: lightweight material ?to minimise boardbag weight. 10% lighter than previous model.
12mm High Density Padding on Rail: provides an extra tough layer of protection against impact.
10mm High Density Padding on Body: provides a tough layer of protection against impact.
Dual Density Rail Frame: absorbs impact to maximise rail protection.
Contoured 3DxFit: uses a unique ‘armadillo’ strip that not only provides ventilation, but keeps the bag snug and secure around your board.
Heavy Duty Polyester Skin: heavy duty outer layer for added protection.
Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
Expandable Fin Wing: allows you to carry your board with or without fins.
Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
Airflow System: reduces internal heat, removes moisture, and maintains dryer internal compartments.
Internal Separation Sheet and Strap: separates and secures the boards in the cover.
Template
SHORTBOARD + FUNBOARDMax Number of Boards - Two
Cover Size Max Board Length* Max Board Width* Cover Weight 6'0" 6'1" 2?1 1/3" / 541mm 2.4kg 6'3" 6'4" 22 4/7" / 573mm 2.5kg 6'7" 6'8" 22 4/7" / 573mm 2.6kg
* Based on average board thickness to width ratio.$299.00 -
FCS II Gerry Lopez Tri-Quad Fin Set
Through his numerous experiences surfing heavy waves on the North Shore, Gerry Lopez's new upright template provides speed and control through hollow powerful waves.
Gerry Lopez, AKA Mr. Pipeline, showed what was possible on the infamous North Shore wave, adopting a relaxed stance while disappearing inside the hollow wave. His new fin template feels stable yet loose enough to turn smooth and easy. Ideal for bigger hybrid models these are the perfect fins for hollow powerful waves.
- Available in Medium Tri and Tri-Quad Sets.
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance hybrid models with deep concaves and moderate-to-extreme rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.21 107.0 4.21 119.7 14.84 9572 31.1° Flat Q-Rear 3.77 95.8 3.74 95.2 9.38 6054 31.4° Flat $309.00 -
Overview
10mm foam body with extra 5mm nose padding and marine grade zippers, this cover is purpose designed for comfortable single longboard travel.
Features
- Lightweight: lightweight material to minimise boardbag weight. 20% lighter than previous model.
- 10mm Dual Density Padding on Body: provides an extra tough layer of protection against impact.
- 5mm High Density Padding on Nose: provides a tough layer of protection against impact.
- Heavy Duty Nylon Skin: heavy duty outer layer for added protection.
- Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
- Expandable Fin Wing: allows you to carry your board with or without fins.
- Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
- Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
$319.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$319.00 -
FCS II Matt Biolos Tri-Quad Fin Set
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
- Tri/Quad (5 fin) set.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
$319.00 -
Overview
10mm foam body with extra 5mm nose padding and marine grade zippers, this cover is designed for comfortable double board travel.
Features
- Lightweight: lightweight material âto minimise boardbag weight. 20% lighter than previous model.
- 10mm Dual Density Padding on Body: provides an extra tough layer of protection against impact.
- 5mm High Density Padding on Nose: provides a tough layer of protection against impact.
- Heavy Duty Nylon Skin: heavy duty outer layer for added protection.
- Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
- Expandable Fin Wing: allows you to carry your board with or without fins.
- Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
- Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
$329.00 -
FCS Travel 2 Fun Board Bag - Black/Grey
Designed for travel with 2 surfboards
10mm foam body with extra 5mm nose padding and marine grade zippers, this cover is purposely designed for comfortable travel with two boards.
Colour Black with light grey underneath. Please note image supplied is in white, this variant is light grey underneath
Lightweight: lightweight material to minimise boardbag weight.
10mm Dual Density Padding on Body: provides an extra tough layer of protection against impact.
5mm High Density Padding on Nose: provides a tough layer of protection against impact.
Heavy Duty Nylon Skin: heavy duty outer layer for added protection.
Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
Cover Size Max Board Length* Max Board Width* Cover Weight 6'3" 6'4" 21 2/4" / 546mm 4.4kg 6'7" 6'8" 21 2/4" / 546mm 4.5kg 7'0" 7'1" 21 2/4" / 546mm 4.6kg
* Based on average board thickness to width ratio.$359.00 -
Overview
12mm foam body with extra 2mm plastic plate on the nose and marine grade zippers, this cover is designed for comfortable triple board travel.
Features
- Lightweight: lightweight material âto minimise boardbag weight.
- 12mm Main Body PE Foam:provides an extra tough layer of protection against impact.
- 2mm Plastic Plate on Nose & Tail:provides a tough layer of protection against impact.
- 2 Tone Protection: Custom 600D weighted material with PRC coating creates a water-resistant shield and added barrier to protect the fabric.
- Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
- Internal Features:compression straps and separation sheets eliminate board movement and damage during transit.
- Custom Moulded Handle:
Folded multi-layered webbing handle with stiff EVA insert is strong, resists twisting and is tapered perfectly to fit the hand.
- Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
- Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
$419.00 -
FCS Travel 2 Wheelie Longboard Cover
Designed for travel with 2 longboards. Wheels for making transportation easy.
Enhanced with extra features including our Dual Density Rail Frame, this cover is purpose designed for comfortable board travel.
10mm Dual Density Padding on Body: provides an extra tough layer of protection against impact.
5mm High Density Padding on Nose: provides a tough layer of protection against impact.
Heavy Duty Nylon Skin: heavy duty outer layer for added protection.
Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
Cover Size Max Board Length* Max Board Width* Cover Weight 9'2" 9'3" 20" / 510mm 7.2kg 10'2" 10'3" 20" / 510mm 7.9kg
* Based on average board thickness to width ratio.$489.00 -
FCS Travel 4 All Purpose Cover
Enhanced with extra features including our Dual Density Rail Frame, this cover is purpose designed for comfortable board travel.
12mm Dual Density Padding on Body: provides an extra tough layer of protection against impact.
2mm Plastic Plate Nose Protection: provides a tough layer of protection against impact.
Heavy Duty Nylon Skin: heavy duty outer layer for added protection.
Padded Rail Protection: internal layer of protection along the zipper path helps to prevent rail damage.
Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
Long-life Marine Zippers: durable, long-life moulded PK Delrin zipper built for strength, durability and resistance to seizing.
Cover Size Max Board Length* Max Board Width* Cover Weight Bag Depth / Construction 6'3" 6'4" 20" / 510mm 5.8kg 240mm Coffin 6'7" â6'8" 2â0" / 5â10mm â6.0kg 240mm Coffin 7'0" â7'1" 2â0" / 5â10mm â6.2kg 240mm Coffin $489.00
