Curve Aluminum Triple Sup Rack
Description
SUP Wall Rack Triple Aluminium by Curve
NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)
Features
- super resistant to rust and corrosion
- super strong & durable aluminium construction
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 3 Stand Up Paddle Boards
- arm length 59cm, base height 54cm, space between arms 20cm
- Curve 12 month guarantee
You may also like ...
-
PRODUCT FEATURES:
• Sturdy Rack Manufactured from engineering reinforced glass-filled nylon resin
• Rack Capacity = 1 Surfboard
• Holds up to 18kg (39lbs)
• Can be mounted any distance apart to accommodate all different length surfboards
• Storage Rack for all Surfboards
• Great way to Organize your Garage
• Rack Protrudes from wall 440mm (17″)
• 45 degree angle
• Will Never RustWHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
The perfect way to store a roofbox. Works just as perfectly for kayaks, stand up paddle boards and surfboards.
Features
-To be mounted on garage ceiling
-Lifts load easily with help of winch
-Lifts load up to 100kg
-Works perfectly with roof boxes, kayaks, surfboards etc$399.00 -
PRODUCT FEATURES:
• Sturdy Rack made from Engineering Glass-Filled Reinforced Nylon
• Rack Capacity = 1 Skateboard
• Holds up to 18kg (39lbs) – Will accommodate any size skateboard or snow board
• Can be mounted any distance apart to accommodate skateboards and longboardsor snow boards.
• Storage or Display Rack for your Skateboards and Longboards will store your Skateboards and Longboards with the trucks either up or down.
•Great way to Organize your Garage.WHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$59.00 -
PRODUCT FEATURES:
• Sturdy Rack made from Engineering Reinforced Glass-Filled Nylon
• Rack Capacity = 1 Nipper Boards or Mal Board
• Holds up to a 18kg (39lbs)
• Can be mounted at any distance apart to accommodate all different length boards
• Storage or Display Rack for your Nipper Boards or Mals
• Great way to Organize your GarageWHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
PRODUCT FEATURES:
• Sturdy Rack Manufactured from engineering reinforced glass-filled nylon resin
• Perfect for displaying shortboards (Fine Rail Boards)
• Rack Capacity = 1 Surfboard
• Holds up to 18kg (39lbs)
• Can be mounted any distance apart to accommodate all different length surfboards
• Curl size 1 3/4″ – 15 degree angle
• Rack Protrudes from wall 260mm (10.2″)WHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For board protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
PRODUCT FEATURES:
• Sturdy Storage Rack made from Engineering Reinforced Glass-Filled Reinforced Nylon
• Rack Capacity = 1 Wakeboard or Kiteboard
• Holds up to 18kg (39lbs)
• Can be mounted any distance apart to accommodate all different length Wakeboards or Kiteboards.
• Storage Rack for your Wakeboard or Kiteboard
• Great way to Organize your GarageWHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
The ANGLE Wall Rack is a super strong, heavy duty rack, that is purpose built to support extra large boards such as SUP and longboard surfboards.
The tight angle of the bend tucks boards into the wall, keeping stored boards out of the way and making for a great option where space is tight.
Built from High-strength steel box tubing (5/8"x5/8") which is covered in quality cushioning foam, provides a safe and soft landing for your board. Sold in pairs.
Features
- high quality foam cushioning to protect your board
- heavy duty steel box tubing construction
- vinyl end caps
- easy installation
Details
- sold in Pairs
- arm extends at approx. 45 degrees, 18 inches (45.7cm) from wall
- will fit even the largest and widest of SUPs with rails up to 6" thick max weight 50lbs (23kg)
- heavy-duty lag bolts included for secure installation
Tips for installation
Installation is easy just 4 bolts to screw into the wall, all parts included.
- check you have 2 racks, 4 bolts and end caps
- always mount your rack to a sturdy surface, such as a wall stud
- pre-drilling pilot holes will make screwing of lug bolts easier
- included caps provide for a nice finished look to your rack, so you can secure your board safely, out of the way, and in style!
$80.00 -
Board racks for mounting to wall studs / van walls.
Strong Aluminium construction.
Foam padding protects your board.$69.00 -
SUP Wall Rack Triple Aluminium by Curve
NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)Features
- super resistant to rust and corrosion
- super strong & durable aluminium construction
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 3 Stand Up Paddle Boards
- arm length 59cm, base height 54cm, space between arms 20cm
- Curve 12 month guarantee
$150.00 -
SUP Wall Rack Quad Aluminium NZ by Curve
Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely unnecessary!
Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity Easily supports 4 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)Got less than 4 boards? Check out our triple and double SUP rack options...
Features
- super strong & durable aluminium construction
- super resistant to rust
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 4 Stand Up Paddle Boards
- arm length 68cm , base height TBAcm ["], space between arms 30cm
- Curve 12 month guarantee
$199.00 -
Horizontal stacking - Fits 4 boards (with fins) or up to 8 boards (without fins)
Vertical stacking - Fits 1-8 boards (with fins) or up to 16 boards (without fins)
Heavy Duty Metal Frame
50mm protective EVA padded sleeves
W 780mm X D 500mm (ASSEMBLED) X2
$279.00 -
Thule Wall Hanger
Get your gear off the floor with at Thule Wall Hanger
- Load capacity 40 kg.
- Does not fit the Thule EasyFold bike carrier.
$159.00
