- Home /
- SURF & SUP /
- Surf Accessories /
- Deck Grip /
- Creatures Nat Young Grip Light Grey
Creatures Nat Young Grip Light Grey
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
Description
Creatures Nat Young Grip
Nat Young’s Signature 3-piece traction pad is designed for committed performance surfing. New Dual layer technique and more cut-outs to increase board feel and reduce weight. 7mm Teardrop Arch with square ridging cut outs, Square-Loc traction pattern and a 28mm Ramp kick, 3M Adhesive backing and the exclusive lightweight premium EVA formula.

You may also like ...
-
Geiselman Blue Thickneck Traction Pad
Fashion and function takeover the Gorilla Eric Geiselman Traction.
The Geiselman pad is designed with a custom wedge that is tapered at the rails to minimize water drag. The multiple layered grooves match the variety of pressure placed on the pad allowing the rider to power through turns and land those difficult maneuvers.
Product Features
- Three piece pad
- Diamond III groove
- Barrel arch
- Custom wedge
- Ultra strength glue
$74.00 -
FCS Julian Wilson Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Double Square Groove
- Trapeze arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Channels for extra resistance
$74.00 -
FCS Filipe Toledo Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Diamond III Groove
- Drop arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra-thin sensitivity
- ​Channels for extra resistance
Focusing on comfort, support and increased grip, FCS Traction keeps your foot connected to the board so you can push hard against your fins for maximum speed and drive.
"Whether you're pushing hard through a turn or launching off the lip, my pad is designed to help you feel connected and in control of your board" - Filipe Toledo$89.95 - 3 piece pad
-
FCS Julian Wilson Treadlite Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Treadlite Technology
Treadlite uses micro-dot traction technology which allows maximum stick potential in high performance maneuvers.
It is our thinnest and lightest traction pad yet, making the back of the board more responsive and easier to feel your way through the turn.
Features
- 3 piece pad
- Custom Groove
- High tail kick
- Nano-dot grip technology
- Ultra-thin sensitivity
- Channels for extra resistance
$89.95 -
Gorilla Kick Grip
Paying homage to some of the original Gorilla Grip designs from the 80s and 90's, our Kick Heritage Series pad features our traditional G branding and unique outlines that will add a touch of nostalgia to any surfboard.
Old school perforations matched with low profile arch bars. The tail pad "boomerang" strip adds extra grunt to grip
Product Features:
- 4 Piece Tail Pad
- Ultra light EVA foam construction
- Old school perforations
- Boomerang strip for extra grip
- Kick Tail
$74.00 - 4 Piece Tail Pad
-
Gorilla Grip Skinny Two Traction Pad
Made from ultra-thin EVA to reduce weight and provide a more connected feel to the board, Gorilla Grip Skinny Series pads feature a micro-corduroy groove offering the ultimate in sensitivity and resistance.
Features
- 2 piece pad
- Micro Corduroy Groove
- No Arch
- Medium/High Kick
$69.00 - 2 piece pad
-
FCS Julian Wilson Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Double Square Groove
- Trapeze arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Channels for extra resistance
$74.00 -
Creatures Grffin Colapinto Lite Ecopure Traction
Griffin Colapinto's Signature LITE EcoPure 3-Piece Traction Pad is designed with Less Impact and Proven Performance for extreme traction. The THERMO-LITE Diamond Loc II pattern and steep Alpine Kick is what Griffin wanted for that locked-in feel for his modern surfing approach.
Features
EcoPure Organic Additive - Biodegradable FOAM
Diamond Loc II - Traction Pattern. Thinner, Lighter, More Responsive
7mm Teardrop Arch Bar
30mm Alpine Kick
3 Piece
3M Adhesive
Responsible Packaging - Recyclable + Biodegradable
Dimensions
L - 300mm (11 3/4")
W - 300mm (11 3/4")
$89.00 -
Creatures Proto 1.4 Eco Traction - Black Speckle Lime
AVAILABLE JUNE 2023, ONLY AVAILABLE IN-STORE
THE BIGGEST REVOLUTION IN SURF TRACTION SINCE IT WAS INVENTED. MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
After 3 years of intensive development with World Champs Mick Fanning and Italo Ferreira, Creatures have created a traction pad that both elevates your surfing and drastically reduces manufacturing waste.
THE UGLY TRUTH
Traction has been left in the dust. Nearly 50 years from its creation, traction has yet to take the giant revolutionary leap like surfboards, leashes, wetsuits, fins and boardshorts have.
Surf grip is still made using the same inefficient and limiting processes as it has for decades.
Currently, making one tail pad creates 67%* EVA foam waste. it’s an ugly truth that produces a mountain of EVA foam off-cuts and dust.
WHY IS MOULDED TRACTION BUILT BETTER?
Instead of cutting from blank EVA foam blocks, every element is injection-shaped for ultimate precision. PROTO™1.4’s moulded tech reduces waste to just 5%! Mixing in EcoPure® organic additive to the EVA formula ensuring the material biodegrades at its end of life. The end result is an ultra-precise tail pad that creates radically less waste and ultimate performance.
WHAT ABOUT PERFORMANCE?
Because moulded technology offers unlimited potential, there's no longer the archaic constraints of routing, cutting and sanding. Working with World Champs Mick Fanning and Italo Ferreira to re-imagine traction as we know it. And when it comes to performance, they each have radically different approaches and preferences...
Mick Fanning: 5'11" natural foot with a fundamental approach that's calculated and precise.
Italo Ferreira: 5'7" goofy foot with explosive, unpredictable flair and a massive bag of tricks.
With 4X World Titles and an Olympic Gold medal between them, we had the confidence to raise the bar.
MULTI-LOC™ : WORLD-FIRST MULTI-DIRECTIONAL GRIP PATTERN
13X World Titles have been won using Creatures proven Square-Loc and Diamond-Loc traction patterns. This influenced the fundamental development of MULTI-LOC™.
Through the 3-year R&D process, and introducing foot mapping to analyse exactly what Mick and Italo required to push their level of connection and response.
Mick altered every detail down to a fraction of a millimeter, including the direction, angle and space of each traction element.
Italo increased the profile of the traction on the kick incline and in the "sweet spot".
Prototype Notes: Mick and Italo settled on a 55 duro for the perfect density. Not too hard, not too soft.
RECOIL KICK: SPRING LOADED KICK TAILS
"I love! Can I get a steeper kick?" - Italo
The RECOIL kick is where it all started and was identified as a potential game-changing component to modern surfing. The rear hex pattern offers a natural folding point that springs back when compressed. The steep alpine kick provides engaged response through critical manoeuvres.
The form-fitting concave underside is designed for the convex deck of a performance surfboard for premium application. A channel on the top of the kick allows flex to form-fit any shaped deck.
Italo steepened the kick to a 46° angle.
Prototype Notes: The increased kick angle raised its overall height from 32mm to 38mm.
PRO-FORM ARCH: COMFORT AND SUPPORT LIKE A RUNNING SHOE
"I'm constantly moving my back foot, the arch provides support exactly where I need." - Mick
The PRO-FORM arch is based off Creatures proven tear drop shape and is over-moulded by a grip pattern that is designed for comfort. The result is a squishy base and contoured shape that hugs your foot, helping soften the impact of hard landings.
It is compression moulded to the MULTI-LOC™ traction without the use of glue. This creates a single component that keeps water out.
Prototype Notes: Mick and Italo softened the arch squishiness at a duro of 40 for added comfort and impact absorption.
NEXT LEVEL TRACTION BUILT FOR THE FUTURE.
Re-inventing traction through Moulded Technology, Creatures PROTO™1.4 provides the world-first multi-directional grip pattern, MULTI-LOC™, to lock your foot in place. A PRO-FORM arch gives cushioned support, and a RECOIL kick helps lift projection through critical manoeuvres. In our aim to make a product that is BUILT better, moulded technology has allowed us to dramatically reduce our manufacturing waste.
MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
*analysis undertaken using Creatures of Leisure Icon III pad using industry standard manufacturing
$99.00 -
Creatures Proto 1.4 Eco Traction - Platinum Sparkle Fluoro
AVAILABLE JUNE 2023, ONLY AVAILABLE IN-STORE
THE BIGGEST REVOLUTION IN SURF TRACTION SINCE IT WAS INVENTED. MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
After 3 years of intensive development with World Champs Mick Fanning and Italo Ferreira, Creatures have created a traction pad that both elevates your surfing and drastically reduces manufacturing waste.
THE UGLY TRUTH
Traction has been left in the dust. Nearly 50 years from its creation, traction has yet to take the giant revolutionary leap like surfboards, leashes, wetsuits, fins and boardshorts have.
Surf grip is still made using the same inefficient and limiting processes as it has for decades.
Currently, making one tail pad creates 67%* EVA foam waste. it’s an ugly truth that produces a mountain of EVA foam off-cuts and dust.
WHY IS MOULDED TRACTION BUILT BETTER?
Instead of cutting from blank EVA foam blocks, every element is injection-shaped for ultimate precision. PROTO™1.4’s moulded tech reduces waste to just 5%! Mixing in EcoPure® organic additive to the EVA formula ensuring the material biodegrades at its end of life. The end result is an ultra-precise tail pad that creates radically less waste and ultimate performance.
WHAT ABOUT PERFORMANCE?
Because moulded technology offers unlimited potential, there's no longer the archaic constraints of routing, cutting and sanding. Working with World Champs Mick Fanning and Italo Ferreira to re-imagine traction as we know it. And when it comes to performance, they each have radically different approaches and preferences...
Mick Fanning: 5'11" natural foot with a fundamental approach that's calculated and precise.
Italo Ferreira: 5'7" goofy foot with explosive, unpredictable flair and a massive bag of tricks.
With 4X World Titles and an Olympic Gold medal between them, we had the confidence to raise the bar.
MULTI-LOC™ : WORLD-FIRST MULTI-DIRECTIONAL GRIP PATTERN
13X World Titles have been won using Creatures proven Square-Loc and Diamond-Loc traction patterns. This influenced the fundamental development of MULTI-LOC™.
Through the 3-year R&D process, and introducing foot mapping to analyse exactly what Mick and Italo required to push their level of connection and response.
Mick altered every detail down to a fraction of a millimeter, including the direction, angle and space of each traction element.
Italo increased the profile of the traction on the kick incline and in the "sweet spot".
Prototype Notes: Mick and Italo settled on a 55 duro for the perfect density. Not too hard, not too soft.
RECOIL KICK: SPRING LOADED KICK TAILS
"I love! Can I get a steeper kick?" - Italo
The RECOIL kick is where it all started and was identified as a potential game-changing component to modern surfing. The rear hex pattern offers a natural folding point that springs back when compressed. The steep alpine kick provides engaged response through critical manoeuvres.
The form-fitting concave underside is designed for the convex deck of a performance surfboard for premium application. A channel on the top of the kick allows flex to form-fit any shaped deck.
Italo steepened the kick to a 46° angle.
Prototype Notes: The increased kick angle raised its overall height from 32mm to 38mm.
PRO-FORM ARCH: COMFORT AND SUPPORT LIKE A RUNNING SHOE
"I'm constantly moving my back foot, the arch provides support exactly where I need." - Mick
The PRO-FORM arch is based off Creatures proven tear drop shape and is over-moulded by a grip pattern that is designed for comfort. The result is a squishy base and contoured shape that hugs your foot, helping soften the impact of hard landings.
It is compression moulded to the MULTI-LOC™ traction without the use of glue. This creates a single component that keeps water out.
Prototype Notes: Mick and Italo softened the arch squishiness at a duro of 40 for added comfort and impact absorption.
NEXT LEVEL TRACTION BUILT FOR THE FUTURE.
Re-inventing traction through Moulded Technology, Creatures PROTO™1.4 provides the world-first multi-directional grip pattern, MULTI-LOC™, to lock your foot in place. A PRO-FORM arch gives cushioned support, and a RECOIL kick helps lift projection through critical manoeuvres. In our aim to make a product that is BUILT better, moulded technology has allowed us to dramatically reduce our manufacturing waste.
MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
*analysis undertaken using Creatures of Leisure Icon III pad using industry standard manufacturing
$99.00 -
FCS Julian Wilson Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Double Square Groove
- Trapeze arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Channels for extra resistance
$74.00