O&e Sup Rail Tape
Description
Features
4 metres length 60mm width 0.5 thick,
Enough for 2m on each side of your board,
Transparent,
Extra strong adhesive.
You may also like ...
-
Curve Sup Sling fits 25" up to 32"
Struggling with handling and carrying your SUP? Save your energy for paddling with a Curve SUP Sling!
The Curve SUP sling is a pre-shaped sling that fits easily and quickly around any 'naked' Stand Up Paddleboard providing practical handles and shoulder strap - with a simple 2 step closure in seconds - no buckles required.The sling adds handling and carrying performance to your SUP at a minimal weight. Handling is improved via multiple grab handles while carrying functionality is provided via the shoulder strap.
Strategic padding zones add comfort while carrying and rail protection while resting the board.
Large pocket provides storage for essentials such as wetsuits and towels.
NO buckles to break or dent your board
NO straps to get tangled
The SUP sling is also compatible with Curve boardcarry backpacks for greater carrying performance.
How to carry a Stand Up Paddle Board without a SUP handle?
- the SUP Sling Carrier fits Stand Up Paddle Boards for easy SUP carry
- easiest sling to use - no fiddly buckles or straps to get tangled!
- two step velcro closure, attaches tight around your board in seconds!
- easy handling with 3 grab handles and shoulder strap
- padded adjustable shoulder strap with super strong buckles
- paddle grips secure your paddle for hands-free carry
- strategic padded zones boost rail protection and hip comfort with 10mm padding
- two sizes: Standard for SUP's up to 32", and Large for SUP's 33" and wider
- large pocket stores wetsuits, towels and gear with mesh for drainage
- constructed from hard wearing 600D polycanvas
two size options
- Standard size fits all SUP's from 25" to 32" wide
$100.00 -
O&E SUP/Longboard Tie Downs
Need some straps to secure your SUP or longboard to your roof racks? The SUP-Longboard Tie Down Straps from Ocean and Earth are easy to attached and remove, featuring a heavy duty 38mm wide webbing with protective rubber cam buckle to avoid scratches on your car.
Comes with a storage bag and rail protection pads. These premium tie down straps will secure your SUP or longboard safely to your vehicles roof rack system.
Features:
Includes 4 x rail protection pads
- Couple with O&E Rack Pads for extra protection
$64.00 -
Loksak Waterproof Case
Great for: phones, keys, cash, credit cards and small kits.
aLOKSAK bags are resealable element-proof storage bags featuring a hermetic seal. That means absolutely no water, air, dust or humidity permeates the closure. They are designed for a wide range of applications and environments. The transparent bags are flexible and puncture resistant. They come in multiple sizes and can be sealed over and over again. The unique and patented materials, closure systems and manufacturing techniques used to fabricate the aLOKSAK surpass even the most rigorous testing standards.
Features:
- Inner Dimensions 9.84 cm x 17.18 cm
- Comes with a lanyard
- Certified waterproof to 60 metres by SCUBA Schools International
- 100% protection from water, sand, humidity, and snow
- All touch screen electronics work 100% while protected in the aLOKSAK
- Make and receive phone calls while phone is protected in the aLOKSAK
- Made in the USA
$34.00 - Inner Dimensions 9.84 cm x 17.18 cm
-
Need to protect your SUP paddle from getting smashed on your SUP Board? The Ocean and Earth SUP Paddle Blade Guard is the perfect solution. Coming in a 1.2 metre length, this tape uses extra strong adhesive. Protect both your paddle and SUP board with this SUP Paddle Blade Guard.
Features
1.2 metre rubber guard
Protects paddle and board
Comes with extra strong adhesive
Fits: One Paddle,
$29.00 -
Creatures Tie Down Straps
Straps for securing boards to roof racks. Industrial strength 30mm metal buckle with a moulded silicon cover for car protection. Heavy-duty 30mm military grade webbing. Designed to attached boards to roof racks. offered in 9' (2.75M), 12' (3.65M) and 15' (4.55M)
Features
Industrial strength corrosion resistant metal cam buckle
Moulded Silicon buckle cover for board and car protection
30mm heavy-duty military grade, UV treated webbing
Designed to attached boards to roof racks
Reusable carry bag
$59.00 -
Stand Up Paddle Lightweight Board Cover
FITS : 1 Board
FABRIC : UV Reflective Tarpee
PADDING : 5mm Waterproof
FEATURES :
• Protective nose piece both sides
• Side Gusset
• Shoulder Strap
• Non corrosive nylon zips
• Fin slot
• Removable storage hook$219.00 -
Features
4 metres length 60mm width 0.5 thick,
Enough for 2m on each side of your board,
Transparent,
Extra strong adhesive.$69.00 -
Curve Triple SUP Steel Rack
Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)
Precision engineered from a multi stage anti corrosion process, this pair of Curve steel Triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty steel tubing that has been powder coated and treated to provide excellent rust protection.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 20kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage spaceAngled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity Easily supports 3 standup paddle boards up to 20kg each with fins left on (plenty of space between levels)Got 2 or 4 boards? Check out our Double and Quad SUP rack options...
Features
- multi stage anti-corrosion process
- super strong & durable steel construction
- powder coated in black
- arms set at 10 degree incline to make boards extra secure and easy to load
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 3 Stand Up Paddle Boards
- arm length 68cm [27"], base height 66cm [26"], space between arms 30cm [12"]
- Curve 12 month guarantee
$160.00 -
Dakine Cyclone Roll Top Pack 32L - Cascade Camo
- Waterproof welded construction with roll top closure
- Welded stash pocket with water resistant YKK® PU coated zipper
- Breathable ergonomic shoulder straps and backpanel
- Mesh side pocket
- Adjustable sternum strap
$199.00 -
Wave size: 4ft (1.2m)
Cord dia. : 5⁄16" (8mm)
Strap : 50mm - padded
Railsaver : extra longOne piece extruded cord
From swivel to swivel - just one cord... One component. Eliminates the need for end joins, which are the weakest points in conventional leashes, meaning no weak points.Dual anchor swivels
Marine grade, stainless anti-corrosive free-spin swivels for tangle-free surfing.Original detachable railsaver
The original railsaver system designed by o&e, with sewn in anchor cord. Protects rails and is easily detached.New formula controlled-stretch urethane
The larger the wave, the more stretch which keeps your board at a safe distance away. Premium grade quality urethane developed by the world's leading manufacturer.Flex neck strap plug
Allows 360º movement of leash and offers more comfort when leash is under load.Safety release pull tab
Easy to see ‘safety red’ quick release pull tab. Essential when surfing big waves and reefs.Easy-wrap neoprene strap inner
Vertically moulded neoprene panels easily wrap around your ankle, adding to comfort.Plug buddy
Another o&e first. Ensures leash string can be easily slipped through surfboard plug.Warranty
Guaranteed against faulty workmanship or defective materials for 12 months from date of purchase.$79.00 -
Dakine Aero Rack Pads X-Large
34" 86.5cm
MUST-HAVE RACK PADS FOR KEEPING YOUR BOARD SAFE ON YOUR ROOF RACK
Padding where you need it. These aero rack pads put plenty of padding against your board while leaving a more aerodynamic profile under the crossbar than a traditional pad. Easy to use hook-and-loop closure secures them in place. The XL width is designed for larger SUVs and truck racks. The heavy-duty build handles the wear and tear of sun and weather.Fits wider/ thicker rack cross bars
Only pads top of bar for sleek fit
Durable UV resistant 600D polyester material
Hook and loop closure34" / 86.5cm long pad - Set of two.
$95.00 -
Dakine Aero Rack Pads
18" - 46cm
The Dakine Aero Rack Pads are the answer to a more aerodynamic foam pad for your existing roof rack crossbars. Transport your surfboards with these 18-inch wide rack pads with upper padding and a sleek hook-and-loop closure holding them in place. The Aero Rack Pads are offered in two sizes to fit a range of crossbar circumferences.
Only pads top of bar for sleek fit
Non fading UV resistant 600D polyester material
Hook and loop closure18" / 46cm long pad - Set of two.
Fits regular 14-20cm bar circumference$52.00
