Fcs2 Carver Neo Glass Med Eucalyptus Tri
Description
FCS2 Carver Neo Glass Medium Tri Fin Set - Eucalyptus
The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open-face waves.
Overview
The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open-face waves. Constructed with 50% glass and bio-resin, the Neo Glass Eco Carver has a low-impact construction with high-impact performance that’s recommended for lighter more agile surfers.
- Designed for powerful, drawn-out turns with added hold.
- An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Eco Neo Glass
About Eco Blend
At FCS, they'vemade it theirmission to minimise their footprint by designing high-quality products that use low-impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low-impact construction with high-impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.
Sustainability & Community
FCS Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, improve their income, and ensure better health and living conditions.
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| MED | 4.47 | 113.4 | 4.54 | 115 | 14.96 | 9650 | 37 | Flat |
| LRG | 4.58 | 116.3 | 4.66 | 118 | 15.73 | 10150 | 37 | Flat |
You may also like ...
-
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat$159.00 -
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Overview
Mick's fin in premium pc material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.Ideal conditions
Open face, down-the-line waves, particularly good in point and reef breaks.Board types
Designed to fit the fcs ii fin system.
Recommended for performance shortboards with moderate-to-extreme rocker.Fin family
Carver: find power. Powerful, drawn-out turns with added hold.$139.95 -
Powerful, drawn-out turns. Excels on open face waves.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
Fcs2 Carver Neo Glass Small Quad Side
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
Neo Glass
Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
Fin Specs
Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50$89.00 -
Fcs2 Carver Perfomance Glass Quad Side Small
Side byte set designed for 2+1 setups on longboards and SUP's.
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
$129.00 -
Fcs2 Julian Wilson Tri Fins
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.
"My fins feels sturdy, fast and predictable with great projection out of the lip, and plenty of control when pushing your board hard through a turn” – Julian WilsonOverview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$229.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
Tri/Quad (5 fin) se
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
FCS II Carver PC Tri Fin Set - Eucalyptus
Powerful, drawn-out turns. Excels on open-face waves.
Overview
Designed for powerful, drawn-out turns with added hold.
An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.47 113 4.54 115 14.96 9650 37 Flat LRG 4.58 116 4.66 118 15.73 10150 37 Flat XL 4.69 119 4.77 121 16.51 10650 37 Flat $179.00 -
FCS II JS Tri Fin Set
Jason Stevenson's 'JS' shaper fin updated for 2023. Great for surfers looking for a fin that'll feel dependable in bigger waves, but still want the ability to release the tail and surf progressively in smaller waves.
Overview
- All new construction has enabled us to produce the most responsive JS fin to date. AirCore reduces weight and creates more stiffness in the bottom 2/3 of the fin. The carbon tissue inlay helps distribute the flex where it’s needed most and provides quicker memory recall when executing a turn.
- The extra-long base produces lots of drive and speed. The tip is quite tapered and narrow which allows the fin to release out of the lip when pushed hard on more vertical angles of attack.
- “The best surfers in the world have used this fin to win multiple events, so we know it works.” - Jason Stevenson
- This fin is designed for intermediate and above surfers. On the open face it’ll feel secure when carving a longer turn, very smooth when transitioning between turns, with a nice offering of tail release when needed. This fin is all about flow!
Board Types
- This fin can be used across most if the JS range as well as other performance and hybrid models.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
Features:
- Updated construction - More responsive
- Carbon Tissue + AirCore - Lighter and stiffer
- Same template - Speed and Flow
- New stealth aesthetic
- Designed to fit the FCS II Fin System
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)BASE DEPTH AREA SWEEP FOIL Centre Medium 4.53" 115mm 4.53" 115mm 15.08" 9,730mm2 36.1° 50/50 Side Medium 4.53" 115mm 4.53" 115mm 15.08" 9,730mm2 36.1° FLAT Centre Large 4.61" 117mm 4.65" 118mm 15.81" 10,200mm2 36.1° 50/50 Side Large 4.61" 117mm 4.65" 118mm 15.81" 10,200mm2 36.1° FLAT $219.95 -
FCS II JS Tri Fin Set
Jason Stevenson's 'JS' shaper fin updated for 2023. Great for surfers looking for a fin that'll feel dependable in bigger waves, but still want the ability to release the tail and surf progressively in smaller waves.
Overview
- All new construction has enabled us to produce the most responsive JS fin to date. AirCore reduces weight and creates more stiffness in the bottom 2/3 of the fin. The carbon tissue inlay helps distribute the flex where it’s needed most and provides quicker memory recall when executing a turn.
- The extra-long base produces lots of drive and speed. The tip is quite tapered and narrow which allows the fin to release out of the lip when pushed hard on more vertical angles of attack.
- “The best surfers in the world have used this fin to win multiple events, so we know it works.” - Jason Stevenson
- This fin is designed for intermediate and above surfers. On the open face it’ll feel secure when carving a longer turn, very smooth when transitioning between turns, with a nice offering of tail release when needed. This fin is all about flow!
Board Types
- This fin can be used across most if the JS range as well as other performance and hybrid models.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
Features:
- Updated construction - More responsive
- Carbon Tissue + AirCore - Lighter and stiffer
- Same template - Speed and Flow
- New stealth aesthetic
- Designed to fit the FCS II Fin System
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)BASE DEPTH AREA SWEEP FOIL Centre Medium 4.53" 115mm 4.53" 115mm 15.08" 9,730mm2 36.1° 50/50 Side Medium 4.53" 115mm 4.53" 115mm 15.08" 9,730mm2 36.1° FLAT Centre Large 4.61" 117mm 4.65" 118mm 15.81" 10,200mm2 36.1° 50/50 Side Large 4.61" 117mm 4.65" 118mm 15.81" 10,200mm2 36.1° FLAT $219.95 -
FCS2 Matt Biolos Tri Fin Set - Blue
Design by Matt Biolos and refined by his diverse stable of elite team riders, the new high performance MB fin is an exciting addition to the range and sits comfortably in the Carver family.
Featuring a wide base, curved trailing edge and a tapered tip, this fin is primarily geared for performance power surfing. The bottom half of the fin produces exceptional power and drive, allowing surfers to push hard through turns while maintain a feeling of stability in critical situations. The tip, which narrows significantly from halfway up the fin, offers the freedom and agility to turn abruptly with confidence.
In contrast to Matt's original upright template (Reactor Family) that was loose and geared for tighter turns in beach breaks, the new MB template offers a balanced blend of drive, power and release that will suit more open-face waves and turns such as carves and power hacks. This fin also pairs particularly well with higher-rocker boards.
PC AirCore construction offers a stiffer flex allowing surfers to harness more power and speed when pushing ultra hard through turns.
- A serious-looking fin for surfers who take their surfing seriously. A no-nonsense performance fin you can use in any of the high-performance Mayhem models.
- Expect a burst of speed from the first pump down the line, a feeling of stability when laying into a rail carve, and a surprisingly lively release action when pushing turns through the lip.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favoured by power surfers who like to perform explosive turns on critical parts of the wave.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.32 109.7 4.39 111.4 13.87 8950 36.6° Flat SML Ctr 4.32 109.7 4.39 111.4 13.87 8950 36.6° 50/50 MED Side 4.50 114.1 4.57 116.1 15.05 9712 36.6° Flat MED Ctr 4.50 114.1 4.57 116.1 15.05 9712 36.6° 50/50 LRG Side 4.69 119.0 4.76 120.9 16.32 10526 36.6° Flat LRG Ctr 4.69 119.0 4.76 120.9 16.32 10526 36.6° 50/50 $219.00
