Fcs2 Otis Carey Morning Sun Eco Bgrip
Description
FCS Otis Carey Eco Grip
Eco 1 piece traction featuring Otis Carey’s Indigenous artwork, also seen on his signature twin +1.
The Otis Carey tail pad offers a signature grip with signature art and performance.
“The artwork on the pad and the fin… it’s my interpretation of tides and how a full moon high tide goes right up the river” - Otis Carey
The grooves, kicks and arches are all dialled in to perfection, where these key features are designed to match your surfing.
Focusing on comfort, support and increased grip, FCS Traction keeps your foot connected to the board so you can push hard against your fins for maximum speed and drive.Features
- Made from Eco EVA
- 1 piece pad
- Diamond groove - high profile diamond-shaped groove with larger spacing locks your foot in place
- Sabre arch - large tapered square design for larger feet and maximum coverage
You may also like ...
-
FCS Julian Wilson Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Double Square Groove
- Trapeze arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Channels for extra resistance
$74.00 -
Gorilla Grip Skinny Three Nomad Tail Pad
The Gorilla Skinny Series is the thinnest and lightest traction you’ll find. Ultralight low profile grips sanded flat for an extra sensitive texture.â£
The Skinny Three Tail Pad by Gorilla Surf is a grippy 3 piece traction that pairs especially well with performance shortboards and boards with a narrow tail shape.Features
- Style: 3 Piece Tail Pad
- Material: Ultra Light EVA foam
- Arch free design
- High Wedge to vertical tail kick
- Flat textured with low profile 2mm
- Sanded finish with plenty of cut outs for maximum grip
$69.00 -
Dakine John John Florence Pro Traction Pad
THE SURFBOARD TRACTION PAD DESIGNED TO MEET THE SPECIFIC DEMANDS OF JOHN JOHN FLORENCE.
Built in collaboration with Hawaii-raised, history-making surfer John John Florence, this Dakine traction pad is designed around John John's specific dimensions and progressive style.
Delivering maximized grip and precision via triple-cut Positraction grip, a five-piece design allows adjustability for use on an array of boards, from everyday shortboard to step-up.
Holes in the kick tail reduce drag, and a 25mm vertical wedge design was sculpted precisely for John John's form. Like all Dakine traction, John John's pad is made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.
- Dakine Friendly Foam biodegradable EVA foam
- Plastic free packaging
- Triple cut Positraction grid pattern
- Five piece pad
- 7mm center arch
- 25mm vert wedge tail kick with beveled edges
- Drilled holes through kick to enhance water flow
- Cut outs enhance board feel and increase grip
- 3M® high grade adhesive
Materials
- 100% Ethylene Vinyl Acetate
Dimensions
- 33 x 31.75 cm
$74.00 - Dakine Friendly Foam biodegradable EVA foam
-
FCS T3 Wide Eco Traction Pad
The new FCS Eco Traction marries the considered design of our popular T-3 Wide traction with materials sourced from nature.
Made from sugarcane-based bio-foam, the popular FCS T-3 Wide traction pad has been reconstructed for sustainability with the same trusted performance you expect from the essential 3-piece grip.
Focusing on comfort, support and increased grip, FCS Traction keeps your foot connected to the board so you can push hard against your fins for maximum speed and drive.
Features
- Made with sugarcane bio-foam
- Wide 3 piece pad
- Double diamond groove & double square groove
- Coffin arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Perforated for extra resistance
- Width at top: 350mm . Width at bottom: 240mm
$84.95 -
Gorilla Grip The Jane Traction Pad
The Jane is a three-piece pad with a single cut through the kick to accommodate multiple tail shapes.
The Jane is a three-piece pad with a single cut through the kick to accommodate multiple tail shapes. Gorilla's exclusive tri-hex groove, side piece perforations, and channels that run through the arch bar provide a unique and effective texture that feels very secure underfoot.
Features
- 3 piece pad
- Tri-Hex Groove
- Copperhead Arch
- Med/High Tail
$69.00 -
Creatures Jack Freestone Lite Ecopure Art Traction
Injecting Jack Freestone's personality into this EcoPure Art Series Traction pad. Less Impact and Proven Performance featuring THERMO-LITE - Thinner, lighter and more responsive traction with a slightly wider template for larger and wider surfboards.
Features
- EcoPure Organic Additive - Biodegradable foam
- THERMO-LITE Diamond Loc II - Traction Pattern. Thinner, Lighter, More Responsive
- 7mm Teardrop Arch Bar
- 35mm Ramp Kick
- 3 Piece
- 3M™ Adhesive
Responsible Packaging - Recyclable + Biodegradable
Dimensions
L - 310mm
W - 320mm
$89.00 -
Creatures Mick Fanning Loc-Lite Ecopure Traction
Creatures LOC-LITE is the newest traction advancement developed by 3x World Champion Mick Fanning. Fusing the proven Square Loc high profile traction with micro dot THERMO-LITE finish, strategic heel & toe cut-outs for ultimate foot engagement and performance.
Features
- EcoPure Organic Additive - Biodegradable FOAM
- Dual Traction: LOC-LITE x THERMO-LITE
- 7mm Teardrop Arch Bar
- 28mm Table Top Kick
- 3 Piece
- 3M Adhesive
- Responsible Packaging - Recyclable + Biodegradable
Dimensions
L - 310mm (12 1/4")
W - 300mm (11 3/4")
$89.00 -
Creatures Proto 1.4 Eco Traction - Black Platinum
AVAILABLE JUNE 2023, ONLY AVAILABLE IN-STORE
THE BIGGEST REVOLUTION IN SURF TRACTION SINCE IT WAS INVENTED. MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
After 3 years of intensive development with World Champs Mick Fanning and Italo Ferreira, Creatures have created a traction pad that both elevates your surfing and drastically reduces manufacturing waste.
THE UGLY TRUTH
Traction has been left in the dust. Nearly 50 years from its creation, traction has yet to take the giant revolutionary leap like surfboards, leashes, wetsuits, fins and boardshorts have.
Surf grip is still made using the same inefficient and limiting processes as it has for decades.
Currently, making one tail pad creates 67%* EVA foam waste. it’s an ugly truth that produces a mountain of EVA foam off-cuts and dust.
WHY IS MOULDED TRACTION BUILT BETTER?
Instead of cutting from blank EVA foam blocks, every element is injection-shaped for ultimate precision. PROTO™1.4’s moulded tech reduces waste to just 5%! Mixing in EcoPure® organic additive to the EVA formula ensuring the material biodegrades at its end of life. The end result is an ultra-precise tail pad that creates radically less waste and ultimate performance.
WHAT ABOUT PERFORMANCE?
Because moulded technology offers unlimited potential, there's no longer the archaic constraints of routing, cutting and sanding. Working with World Champs Mick Fanning and Italo Ferreira to re-imagine traction as we know it. And when it comes to performance, they each have radically different approaches and preferences...
Mick Fanning: 5'11" natural foot with a fundamental approach that's calculated and precise.
Italo Ferreira: 5'7" goofy foot with explosive, unpredictable flair and a massive bag of tricks.
With 4X World Titles and an Olympic Gold medal between them, we had the confidence to raise the bar.
MULTI-LOC™ : WORLD-FIRST MULTI-DIRECTIONAL GRIP PATTERN
13X World Titles have been won using Creatures proven Square-Loc and Diamond-Loc traction patterns. This influenced the fundamental development of MULTI-LOC™.
Through the 3-year R&D process, and introducing foot mapping to analyse exactly what Mick and Italo required to push their level of connection and response.
Mick altered every detail down to a fraction of a millimeter, including the direction, angle and space of each traction element.
Italo increased the profile of the traction on the kick incline and in the "sweet spot".
Prototype Notes: Mick and Italo settled on a 55 duro for the perfect density. Not too hard, not too soft.
RECOIL KICK: SPRING LOADED KICK TAILS
"I love! Can I get a steeper kick?" - Italo
The RECOIL kick is where it all started and was identified as a potential game-changing component to modern surfing. The rear hex pattern offers a natural folding point that springs back when compressed. The steep alpine kick provides engaged response through critical manoeuvres.
The form-fitting concave underside is designed for the convex deck of a performance surfboard for premium application. A channel on the top of the kick allows flex to form-fit any shaped deck.
Italo steepened the kick to a 46° angle.
Prototype Notes: The increased kick angle raised its overall height from 32mm to 38mm.
PRO-FORM ARCH: COMFORT AND SUPPORT LIKE A RUNNING SHOE
"I'm constantly moving my back foot, the arch provides support exactly where I need." - Mick
The PRO-FORM arch is based off Creatures proven tear drop shape and is over-moulded by a grip pattern that is designed for comfort. The result is a squishy base and contoured shape that hugs your foot, helping soften the impact of hard landings.
It is compression moulded to the MULTI-LOC™ traction without the use of glue. This creates a single component that keeps water out.
Prototype Notes: Mick and Italo softened the arch squishiness at a duro of 40 for added comfort and impact absorption.
NEXT LEVEL TRACTION BUILT FOR THE FUTURE.
Re-inventing traction through Moulded Technology, Creatures PROTO™1.4 provides the world-first multi-directional grip pattern, MULTI-LOC™, to lock your foot in place. A PRO-FORM arch gives cushioned support, and a RECOIL kick helps lift projection through critical manoeuvres. In our aim to make a product that is BUILT better, moulded technology has allowed us to dramatically reduce our manufacturing waste.
MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
*analysis undertaken using Creatures of Leisure Icon III pad using industry standard manufacturing
$99.00 -
Creatures Proto 1.4 Eco Traction - Black Speckle Lime
AVAILABLE JUNE 2023, ONLY AVAILABLE IN-STORE
THE BIGGEST REVOLUTION IN SURF TRACTION SINCE IT WAS INVENTED. MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
After 3 years of intensive development with World Champs Mick Fanning and Italo Ferreira, Creatures have created a traction pad that both elevates your surfing and drastically reduces manufacturing waste.
THE UGLY TRUTH
Traction has been left in the dust. Nearly 50 years from its creation, traction has yet to take the giant revolutionary leap like surfboards, leashes, wetsuits, fins and boardshorts have.
Surf grip is still made using the same inefficient and limiting processes as it has for decades.
Currently, making one tail pad creates 67%* EVA foam waste. it’s an ugly truth that produces a mountain of EVA foam off-cuts and dust.
WHY IS MOULDED TRACTION BUILT BETTER?
Instead of cutting from blank EVA foam blocks, every element is injection-shaped for ultimate precision. PROTO™1.4’s moulded tech reduces waste to just 5%! Mixing in EcoPure® organic additive to the EVA formula ensuring the material biodegrades at its end of life. The end result is an ultra-precise tail pad that creates radically less waste and ultimate performance.
WHAT ABOUT PERFORMANCE?
Because moulded technology offers unlimited potential, there's no longer the archaic constraints of routing, cutting and sanding. Working with World Champs Mick Fanning and Italo Ferreira to re-imagine traction as we know it. And when it comes to performance, they each have radically different approaches and preferences...
Mick Fanning: 5'11" natural foot with a fundamental approach that's calculated and precise.
Italo Ferreira: 5'7" goofy foot with explosive, unpredictable flair and a massive bag of tricks.
With 4X World Titles and an Olympic Gold medal between them, we had the confidence to raise the bar.
MULTI-LOC™ : WORLD-FIRST MULTI-DIRECTIONAL GRIP PATTERN
13X World Titles have been won using Creatures proven Square-Loc and Diamond-Loc traction patterns. This influenced the fundamental development of MULTI-LOC™.
Through the 3-year R&D process, and introducing foot mapping to analyse exactly what Mick and Italo required to push their level of connection and response.
Mick altered every detail down to a fraction of a millimeter, including the direction, angle and space of each traction element.
Italo increased the profile of the traction on the kick incline and in the "sweet spot".
Prototype Notes: Mick and Italo settled on a 55 duro for the perfect density. Not too hard, not too soft.
RECOIL KICK: SPRING LOADED KICK TAILS
"I love! Can I get a steeper kick?" - Italo
The RECOIL kick is where it all started and was identified as a potential game-changing component to modern surfing. The rear hex pattern offers a natural folding point that springs back when compressed. The steep alpine kick provides engaged response through critical manoeuvres.
The form-fitting concave underside is designed for the convex deck of a performance surfboard for premium application. A channel on the top of the kick allows flex to form-fit any shaped deck.
Italo steepened the kick to a 46° angle.
Prototype Notes: The increased kick angle raised its overall height from 32mm to 38mm.
PRO-FORM ARCH: COMFORT AND SUPPORT LIKE A RUNNING SHOE
"I'm constantly moving my back foot, the arch provides support exactly where I need." - Mick
The PRO-FORM arch is based off Creatures proven tear drop shape and is over-moulded by a grip pattern that is designed for comfort. The result is a squishy base and contoured shape that hugs your foot, helping soften the impact of hard landings.
It is compression moulded to the MULTI-LOC™ traction without the use of glue. This creates a single component that keeps water out.
Prototype Notes: Mick and Italo softened the arch squishiness at a duro of 40 for added comfort and impact absorption.
NEXT LEVEL TRACTION BUILT FOR THE FUTURE.
Re-inventing traction through Moulded Technology, Creatures PROTO™1.4 provides the world-first multi-directional grip pattern, MULTI-LOC™, to lock your foot in place. A PRO-FORM arch gives cushioned support, and a RECOIL kick helps lift projection through critical manoeuvres. In our aim to make a product that is BUILT better, moulded technology has allowed us to dramatically reduce our manufacturing waste.
MORE GRIP, LESS WASTE, ULTIMATE PERFORMANCE.
*analysis undertaken using Creatures of Leisure Icon III pad using industry standard manufacturing
$99.00 -
Gorilla Grip Phat Three Traction Pad
Gorilla Phat pads are designed for surfers with larger feet and hybrid shape boards with a wider tail. Featuring perforations on the side panels and our popular diamond groove, these pads are simple yet effective in making sure you have ample coverage for your foot.
Features
3 piece pad
Diamond Groove
Copperhead Arch
Medium tail kick$64.00 -
FCS Julian Wilson Traction Pad
Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance.
Features
- 3 piece pad
- Double Square Groove
- Trapeze arch bar
- High tail kick
- Sanded surfaces for enhanced grip
- Ultra thin sensitivity
- Channels for extra resistance
$74.00 -
Gorilla Grip Skinny Three Nomad Tail Pad
The Gorilla Skinny Series is the thinnest and lightest traction you’ll find. Ultralight low profile grips sanded flat for an extra sensitive texture.â£
The Skinny Three Tail Pad by Gorilla Surf is a grippy 3 piece traction that pairs especially well with performance shortboards and boards with a narrow tail shape.Features
- Style: 3 Piece Tail Pad
- Material: Ultra Light EVA foam
- Arch free design
- High Wedge to vertical tail kick
- Flat textured with low profile 2mm
- Sanded finish with plenty of cut outs for maximum grip
$69.00
