FCS II Performer Quad Rear Fin Set Glass Flex - Black
FCS II Performer Quad Rear Fin Set Glass Flex - Black
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Two Quad Rear fins.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
You may also like ...
-
Fcs2 Accelerator Neo Glass Medium Tri Fin Set
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal conditions
A wide range of conditions, particularly good in critical overhead waves
Board Types
Performance boards with the FCS II Fin System.Neo Glass
Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.39" / 111mm
Depth: 4.58" / 116mm
Area: 15.28"2 / 98600mm2
Sweep: 33.7o
Foil: Flat$119.00 -
Speed âÂÂÂÂÂÂ& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fin) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$119.00 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
Fcs2 Connect Quad Rear/side Fins Black
Side byte set designed for 2+1 setups on longboards and SUP's.
Overview
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
$59.95 -
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$89.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
-
Fcs2 Kolohe Andino Tri Fins - Black Blue
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
Fcs2 Reactor PC Tri Fins - Charcoal/Black
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95
