O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black
O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black
- TB3-X /Durable Krypto Forefoot
- Glued & Blind Stitched Seams
- Anatomical Fit
- Anti-Flush Shin Strap
- Lightweight Sole
- 3mm
- Sizes 5 -13
- O'Neill Hyperfreak Series
You may also like ...
-
The Rip Curl Reefer boot is a warm water/tropical boot that you can wear surfing but won't overheat your feet. A durable outsole and neoprene/mesh upper provides durability, protection, and comfort.
Features
- Mesh water flow panel
- Compression strap / Barrel lock closure
- Reef protective sole and pull on heel strap
- 1.5mm split toe
$69.00 - Mesh water flow panel
-
Lightweight split toe reef bootie with adjustable Velcro ankle straps, and a pull cord/barrel lock combo for a better seal. Higher cut cuffs cover and protect your ankles. A solid sole underneath the split toe means no annoying leash hangups.
Flexible, high performance boot design for enhanced range of motion.
$79.00 -
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.$89.00 -
Better than Barefoot
Our Custom Pro Series has no equal in the world of aquatic footwear. Every material and design detail has been painstakingly researched, tested, refined, and perfected to yield a boot so good you'll forget you are wearing it.
The Custom Pro is anchored by our patented Full Wrap arch strap, which locks your foot into the boot to insure zero delay between foot movement and board response. Combined with the precision fit of our custom heat-molding process, the Custom Pro provides barefoot feel and response for every possible foot shape: high or low arch, narrow or wide width, high or low volume.
Updates to the 2020 Custom Pro include:
- Wider opening and removed internal tape at the O-Ring cuff improves stretch to make the boot easier to get on/off while still resisting water entry.
- 3D Hollow Fiber neoprene lining material improves air flow for increased warmth.
Recommended Water Temps: 40-50F.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Key Features:
- Heat-moldable for the perfect custom fit.
- Patented seamless Thermo-Form sole for next-level comfort, warmth, dexterity, and durability.
- Internal split-toe locks your foot inside the boot for precise response.
- Super-tacky and flexible 1mm vulcanized rubber sole pods for barefoot board feel, grip, and abrasion resistance.
- 6mm neoprene upper with quad-sealed seams: GBS (Glue/Blind-Stitch), IST (Internal Stretch Tape), External LSS (Liquid Seam Seal).
- Patented full-wrap ankle strap co-molded into the sole improves durability.
- Tatex-coated hook strap improves durability and holding power.
- Tatex heel spine and laminated heel-pull for durability and easy on.
- New Hollow Fiber 3D quick-dry lining increases airflow for greater warmth.
- Double-lined 4mm O-ring cuff seal provides a durable, seamless barrier against flushing with lower bulk.
- Includes a pair of knit Solite Heat Booster socks for added warmth, comfort, and easy on/off.
$165.00 -
Rip Curl Flashbomb Hidden Split Toe Bootie 3mm
The Flashbomb 3mm Hidden Split Toe Booties were made to withstand the coldest water winters, keeping you warmer in the water longer. These booties were constructed with our signature Flash Lining technology for warmth, flexibility and fast dry times. Finished with the SOS Entry System, Super Thin Sole with textured grip, new E5 Tape and a stitchless compression strap - all with a durable rubberized outsole structure.
- Ankle and foot strap
- Slide on easy S.O.S. system
- Textured grip print
- Anti-stink treated
- Seam sealed
$119.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:
3D Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
3-Point Strap with Floating D-Ring
Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption.
Thermal Rebound Lining
The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.
Tatex Flex-Spine
The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:
- Enhances durability with an abrasion resistant rubbery surface.
- Reduces stretch to act like a shoe-horn, making it easier to slide your heel into the boot.
- Provides a sticky external surface to grab your wetsuit leg and prevent flushing.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$159.00 -
Billabong Furnace Hidden Split Toe Wetsuit Boots 3mm - Black Clay
Sustainable style meets performance-enhancing innovation in the Billabong 3mm Furnace Wetsuit Boots. Featuring premium, lightweight neoprene designed to keep you warm and boost mobility, these men’s wetsuit boots are made with recycled Airlite stretch and our exclusive Furnace Graphene for a stretchy, comfortable feel throughout. Designed with a hidden split toe for a barefoot fit.
Features:
Men’s Wetsuit Boots.
3mm.
- Neoprene Foam Type: Smart Foam, partially recycled and premium lightweight
- Exterior Fabric Type: Airlite Recycler stretch now made from 100% recycled fibres
- Interior Fabric Type: Graphene Recycler Plus
- Hidden split toe neoprene boot
Materials:
80% Neoprene, 10% Nylon, 10% Polyester$109.00 -
O'Neill Hyperfreak Fire 3mm Split Toe Wetsuit Boot 3mm - Black
O'Neill Hyperfreak Fire 3mm boots are the remedy for Keeping the Cold Out.Stay covered Head-to-Toe in O'Neill's HyperFire 3mm Split Toe Wetsuit Boot, designed to shield you from the harshest conditions. Our world-class athletes search the planet for perfect surf, the R&D team at Area 52 developed product to allow you to perform in the most extreme elements and excel in the coldest climates.- TB4 Firewall
- Glued and Blind Stitched Seams
- Adjustable Fit Strap
- Anti-Flush Shin Strap
- Durable Outsole
- 3mm
$119.00 - TB4 Firewall
