ELEMNT Wild Cat - Dune
ELEMNT Wild Cat - Dune
Elemnt's Wild Cat Dune has a wider outline plan shape with pulled in round tail, flat bottom rocker combined with a little nose and tail kick.
Lots of volume throughout concentrated from centre point forward under chest area. Fuller rails with single concave bottom running from nose into double concave through fin area and out tail.
Multi fin allows you to run between classic single fin, 2+1 single plus sides, quad fin or twin fin setup.
Construction: EPS/epoxy
Fin System: Multi Fin FCSII /Futures + single fin box
Rocker: medium nose entry, low off the tail
Bottom Contours: subtle single to double concave
Tail Shape: Pulled in round tail.
Does not come with fins.
Dimensions:
- 6’4 21" 2 11/16" 40.02L
- 6’6 21 1/2" 2 3/4 " 43.12L
- 6’8 21 3/4" 2 13/16" 45.62L
- 7’0 22 1/8" 2 7/8" 50.54L
- 7’2 22 1/2" 3" 54.84L
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
If you’re not quite ready to “rip and shred” on a short board, nor are you apt to “cruise” on a long board, then the Hawaiian Pro Designs Egg is the perfect solution. This model is an “eggy” looking shape that allows the rider to trim high on the wave in the middle of the board or race down the line on the tail, whichever the rider prefers. The perfect board for beginner to advanced.Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the entire surfing world. Donald Takayama was famous for his progressive designs that combined both traditional and high performance aspects into every board he made. The result was the best surfers sought out his boards to bring their surfing to the next level. Donald Takayama and Surftech worked together for over 20 years before his passing. The relationship was built on trust and a commitment to produce quality product that would compliment the designs he so passionately created. It is an honor for Surftech to perpetuate Donald’s legacy by continuing to build the most iconic and proven designs.
Dimensions:
LENGTH WIDTH THICKNESS VOLUME (L) 7'6" 21.45" 2.95" 53.5 Construction:
Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.
$1,535.00 -
A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.
With 5 Futures fin boxes, the Summer 5 can be ridden as Quad or Thruster.
Dimensions Volume 5’6 x 21” x 2 3/8” 32.3 l 5’8 x 21 1/2” x 2 1/2” 35.2 l 5’10 x 22” x 2 5/8” 38.3 l 6’0 x 22 1/2” x 2 3/4” 41.8 l 6’2 x 23” x 2 7/8” 45.4 l $819.00 -
The Black Panda is a feature packed groveller which absolutely flies down the line and can be turned on a dime.
It has lot of available volume squeezed into a small board to keep the foam both under your chest and feet. The outline is wide which is offset by a flyer by the fins that keeps the tail width more refined. The tail is the often overlooked diamond tail, which has the benefits of the bite of a swallow tail with the hold and control of a rounded pin tail and perfectly sets up the the water flow of the bottom contours. The Black Panda has a soft channel that runs right through the centre of the board and feeds water to the fins, this gets it up and running really quickly and when put on rail feels like it is on tracks.
The Black Panda, being a groveller, is best ridden with one or two litres more than your shortboard. Summer surfs and lousy looking waves will never look more fun than with a Black Panda in the quiver.”
Jonno Cole
Built using the latest in EPS/Epoxy materials; The XEPS technology combines a lightweight EPS core with High Grade fiberglass cloth and Epoxy resin.
LENGTH WIDTH THICKNESS VOLUME 5’0 20 1/4 2 1/4 25.86 5’2 20 1/2 2 3/8 28.47 5’4 20 3/4 2 1/2 31.24 5’6 21 2 5/8 34.16 5’8 21 1/4 2 5/8 35.67 5’10 21 1/2 2 3/4 38.83 6’0 21 1/2 2 3/4 39.99 6’2 21 2/4 2 7/8 43.45 Was:$945.00Now:$699.00Price:$699.00 -
With a shape that’s more today than yesterday, our modern “fish” design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too.
Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose. Tune to your taste with Tri-Quad option.
Dimensions-6’6” x 21” x 2 5/8”
Recommended Rider Weight-55-85 kg / 120-190 lbs
Volume-39.6 ltr
$695.00 -
ELEMNT Mid Length - Sky
An easy to ride mid sized all rounder, classic concept with a modernised design. low rocker and a combination of single & double concave plus vee, medium rails with forward volume, Paddles extremely well with lots of drive, and pivot can be easily adjusted with the 1 + 2 fin set up, single fin box plus side bites.
Construction: EPS/epoxy
Fin System: FCSII / Future sides plus Single fin box
Rocker: low
Bottom Contours: rolled vee to single/double concave with vee out the tail
Tail Shape: round tail.
Does not come with fins.
- 6’8" 21" 2 3/4" 40.50L
- 7’0" 21 1/8" 2 13/16 44.50L
- 7’2" 21 1/4" 2 7/8 46.50L
- 7’6" 21 3/4" 2 15/16" 51L
- 7’10" 22" 3" 56.50L
$995.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”Geoff McCoy
Biaxial Fibre Glass has about half of its fibers aligned along the length of the cloth (0 degrees) and about halfway across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased maneuverability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fiberglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,325.00 -
Torq Tec Rusty Egg Not - White
Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.
’10 x 20.75” x 2.74” - 43.8 ltr 7’0 x 21” x 2.8” - 46.5 ltr 7’2 x 21.25” x 2.88” - 49.6 ltr 7’4 x 21.5” x 2.96” - 53.1 ltr 7’6 x 21.75” x 3.05” - 57 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.
The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,199.00 -
Channel Islands MINI DC is a collaboration with Kalani Robb and MINI automotive.
Combining passion for performance and fun, you get a versatile surfboard for a wide range of conditions.
Ultra-relaxed rocker, wide nose, wide squash tail, thin rails, and aggressive single to double concave with vee out the tail.
All the speed and wave catching ability of a traditional fish, but with the performance benefits of a squash tail.
Working best in knee to head high surf and is best as your go to groveler.
Construction: Fusion Dual-Core utilizes the lightest and strongest EPS core on the market. Lively and buoyant centre, while the PU foam inserts on the rails combined with the pop-flex stingers give you a natural feel and response
Specs.
Length 5'5" Width 19.8" Thickness 2.4" Volume 29.7L
Length 5'7" Width 20.0" Thickness 2.4" Volume 31.8L
Length 5'9" Width 20.3" Thickness 2.5" Volume 34.1L
Length 5'11" Width 20.5" Thickness 2.7" Volume 38.8L
Length 6'1'" Width 21.0" Thickness 2.9" Volume 42.9L
$1,145.00
