Takayama PLC Egg 7'2
Dimensions:
| LENGTH | WIDTH | THICKNESS | VOLUME (L) |
|---|---|---|---|
| 7'2" | 21.15" | 2.7" | 45.5 |
Construction:
Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
Creative Army Jumbo Jet SLX
Check out these real-life scenarios: You feel under volumed and the struggle of paddling is real. You catch the wave but the surfboard so unstable you can't get to your feet. Your home break is weak and small most of the time. You are a big human that can still surf really well but there's not a surfboard out there that has enough foam/volume for you. If you are relating to any of these scenarios then the Jumbo Jet is here to get you fully stoked.
The Jumbo Jet has a 2 + 1 fin set up that turns easily thanks to the smooth lines of the round tail. Complimented by a tucked edge in the tail and modern rocker the Jumbo Jet accommodates the surfer that wants to go down the line, hit the section, and move the board where ever it needs to go.
Throw in a little nose concave to help create lift for those heavier surfers allowing them to nose ride like a champ. The Jumbo Jet goes well in all conditions from small crappy beach breaks to beautiful points and steeper more challenging waves.
The shorter versions of the Jumbo Jet (7'2 and 8’0) will work a treat, they’re like the 'big guys' shortboard. These boards are for anyone that needs a little bit of help increasing their wave count. The extra volume allows you to paddle with ease, get in early, and give you more time to get to your feet. I'm so stoked on this board it's got my Dad back in the water in his Mid 60's after 10 years out due to injuries and it has got him frothing. Hope you get the same stoke.
SpecificationsNOTE: Centre fin supplied with this board / Rider weight is based on board volume and intermediate rider skill level
LENGTH WIDTH THICK VOLUME FINS APPROX WEIGHT RANGE 7'2 23 1/2" 3 1/2" 65.28ltr FCS 7" CA Custom Fin (supplied) 85kg or less 8'0 23 11/16" 3 5/8" 78.05ltr FCS 7" CA Custom Fin (supplied) 85kg + 9'0 24 1/16" 3 7/8" 97.05ltr FCS 8" CA Custom Fin (supplied) Ideal for all weights 9'6 24 1/4" 4" 106.36ltr FCS 8" CA Custom Fin (supplied) Ideal for all weights Technical InformationConstruction SLX Epoxy
Board Contours Modern Contours
Rail Neutral Rail
Surfer Skill Level Intermediate - Advanced
Wave Height 0-6ft
$1,295.00 -
ELEMNT
ELEMNT SCRAMBLED EGG - FCSII/CAMEL BROWN
“The Scrambled Egg has a constant curve extra wide outline shape, rocker is low through middle of board with late nose kick, with a very subtle single concave bottom contour starting from the nose and middle section, which feeds into a deep double concave and pronounced vee through the fin area.
This board will paddle very well and flow easily through turns. “Adam Dalli
EPS | EPOXY
Constructed using a 36 gram EPS core with a wood stringer, each board is hand laminated using high grade epoxy resin with optical brightener, or resin tint colour, 6 + 4oz fibreglass deck, 6oz bottom plus 4oz fin patch providing a lighter, stronger board.Dimensions5’6 x 20 1/2 x 2 3/8 29.87L
5’8 x 20 3/4 2 7/16 32L
5’10 x 21 x 2 1/2 34.24L
6’0 x 21 1/2 x 2 5/8 37.79L
6’2 x 21 3/4 x 2 11/16 40.19L
6’4 x 22 x 2 3/4 42.68L
6’6 x 22 1/2 x 2 13/16 45.80L$849.00 -
This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.
Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft+ Dimensions - 6’8” x 21” x 2 3/4” Recommended Rider Weight - 40-80kg / 90-175lbs Volume - 41.8 l FINS: 3 Fins supplied – Futures template F6
CONSTRUCTION
$739.00 -
“Mid – three mid length sizes 6’8 to 7’6 that will ensure your wave count is always at maximum. The Fun Division Mid-length is for surfers not really wanting to commit to a full sized longboard but still want to nose ride and trim. This division is suited to all levels of surfer from beginner to advanced.”
Jonno Cole
ECOSKIN TECH:
Aloha Surfboards ECOSKIN Technology is a small step toward producing surfboards that are manufactured with more Earth Friendly ethics.
Paulownia timber is perfectly suited as a sustainable alternative in surfboard production due to it's naturally high strength to weight ratio! One of the fastest growing trees in the world Paulownia production places less stress on the environment saving water and natural resources!
Expanded Polystyrene (EPS) foam is very light and strong. EPS foam has more buoyancy and flotation increasing paddling speed and maneuverability.
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs, decreasing the amount of harmful chemicals released into the environment.
ECOSKIN Surfboards are utilising less toxic materials during production and through these measures we are taking steps to decrease our carbon foot print.LENGTH WIDTH THICKNESS VOLUME 6’8 21 1/4 2 7/8 45.19 7’0 21 3/4 3 50.62 7’6 22 1/4 3 55.58 8'0 22 1/4 3 63.16 Was:$1,125.00Now:$899.00Price:$899.00 -
ELEMNT Double Yolk - Smoke Green
The Elemnt Double yolk, is a mid length egg twin fin model that can paddle and cruise like a midlength, but with more hold, drive and manoeuvrability. Its design has a medium/low rocker curve, and a combination of pronounced vee and deep double concave bottom contours with low rails. Can be ridden in small slow mushy conditions, yet still perform when its overhead and hollow.
Construction:
EPS/epoxy Fin System: FCSII, Futures -
Twin Rocker: medium nose entry, low off the tail
Bottom Contours: Vee to subtle single and deep double concave
Tail Shape: Pulled in round tail
Does not come with fins.
Dimensions:
- 6’4" 21 1/2" 2 5/8" 36.85
- 6’8" 21 3/4" 2 5/8" 39.45L
- 7’0" 22" 2 3/4" 44L
- 7’2" 22 1/4" 2 13/16" 46.75
- 7’6" 22 5/8" 2 7/8" 50.80L
Was:$995.00Now:$699.00Price:$699.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.” Geoff McCoy
Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,145.00 -
Torq Act Volume +
The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
DIMENSIONS 7’4 x 22” x 3” - 55.9 ltr 7’8 x 22 1/2” x 3 3/16” - 63.9 ltr 8’0 x 22 7/8” x 3 1/4” - 68 ltr $1,249.00 -
TORQ Act Chopper - Black Rails /Brushed Gray
The Chopper is a versatile shape – it’s a cruisey ride when the conditions suit, but give it a big open face and it’ll fire on all cylinders.
We’ve updated the shape with more forward volume for a more flowy, forward trim style of surfing from the front half of the board but with slightly more flip in the tail rocker for tighter turns and aggressive surfing. This is a very user friendly board that suits small wave days and pumping days as well.
With a 2+1 fin set-up it can be ridden as anything from glidey single fin, 2+1 or thruster.
DIMENSIONS 6’10 x 20 3/4” x 2 5/8” - 42.6ltr 7’2 x 21 1/4” x 2 3/4” - 47.5ltr 7’6 x 21 3/4” x 2 7/8” - 52.5ltr ACT Tech:
THE SCIENCE
Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.
On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.
With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.
$1,199.00 -
The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
Dimensions Volume 8’2 x 22 7/8” x 3 1/4” 70.5 ltr $899.00 -
The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft Dimensions - 7’4” x 22” x 3” Recommended Rider Weight - 55-110 kg / 120-240 lbs Volume - 56 ltr Torq's fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing
$839.00 -
Torq Channel Islands M23 6'8"
The M23 comes from the storied M13 bloodlines, a favorite hybrid board Al Merrick made for himself and rode variants of for decades from fun Rincon to maxing Sunset. A true high performance hybrid that caters to the widest possible type and size of surfer - and for the widest range of wave conditions. Not to be confused with the CI Mid, the M23 carries more foam, boasting a fuller rail and sleeker nose outline. It paddles like a champ while still riding more like a shortboard.
6'8 x 20 3/4 x 2 3/4 (41.8L)
$999.00 -
Torq Channel Islands M23 7'0"
The M23 comes from the storied M13 bloodlines, a favorite hybrid board Al Merrick made for himself and rode variants of for decades from fun Rincon to maxing Sunset. A true high performance hybrid that caters to the widest possible type and size of surfer - and for the widest range of wave conditions. Not to be confused with the CI Mid, the M23 carries more foam, boasting a fuller rail and sleeker nose outline. It paddles like a champ while still riding more like a shortboard.
7'0 x 21 1/4 x 2 7/8 (47.6L)
$1,029.00
