SUP Accessories

Need to protect your SUP paddle from getting smashed on your SUP Board? The Ocean and Earth SUP Paddle Blade Guard is the perfect solution. Coming in a 1.2 metre length, this tape uses extra strong adhesive. Protect both your paddle and SUP board with this SUP Paddle Blade Guard.

Features

• 1.2 metre rubber guard

• Protects paddle and board

• Comes with extra strong adhesive

Fits: One Paddle, 

Loksak Waterproof Case

Great for: phones, keys, cash, credit cards and small kits.

aLOKSAK bags are resealable element-proof storage bags featuring a hermetic seal. That means absolutely no water, air, dust or humidity permeates the closure. They are designed for a wide range of applications and environments. The transparent bags are flexible and puncture resistant. They come in multiple sizes and can be sealed over and over again. The unique and patented materials, closure systems and manufacturing techniques used to fabricate the aLOKSAK surpass even the most rigorous testing standards.

Features:

• Inner Dimensions 9.84 cm x 17.18 cm
  
  
• Comes with a lanyard
  
  
• Certified waterproof to 60 metres by SCUBA Schools International
  
  
• 100% protection from water, sand, humidity, and snow
  
  
• All touch screen electronics work 100% while protected in the aLOKSAK
  
  
• Make and receive phone calls while phone is protected in the aLOKSAK
  
  
• Made in the USA
  
  
  

Dakine Tie Down Straps 12' - Black

The Dakine Tie Down Straps make car roof rack transportation a cinch. These straps are offered as a set of two 12-foot/3.65m straps. The Tie Down Straps feature the secure tightening of heavy-duty 1-inch cam buckles.

• Heavy duty 1" [ 25mm ] cam buckle
• Integrates with Dakine surf travel boardbags
• Carrying bag
• 3.65m

Dakine Aero Rack Pads

18" - 46cm

The Dakine Aero Rack Pads are the answer to a more aerodynamic foam pad for your existing roof rack crossbars. Transport your surfboards with these 18-inch wide rack pads with upper padding and a sleek hook-and-loop closure holding them in place. The Aero Rack Pads are offered in two sizes to fit a range of crossbar circumferences.

Only pads top of bar for sleek fit

Non fading UV resistant 600D polyester material

Hook and loop closure

18" /  46cm long pad - Set of two.
Fits regular  14-20cm  bar circumference

Features

4 metres length 60mm width 0.5 thick, 
Enough for 2m on each side of your board, 
Transparent, 
Extra strong adhesive.

Ocean & Earth

Regular SUP Knee Leash for medium waves. Designed to use in the surf this heavy duty 10ft leash will be able to handle the extreme pull from a SUP board.

Specs
Leash length: 10’ x 3.0m
Cord thickness: 5/16” x 8mm
Cuff width: 2.0” x 50mm
Railsaver width: 1.5” x 38mm

Features
Patent pending 50mm non-slip cuff
Surefire leash release
Dna flex mould
Leash lock
2 year warranty
Stainless steel bearing swivel

Dakine Rack Pads 34" / 86cm

The Dakine Rack Pads Long foam crossbar covers allow easy roof transport of your larger surfboards. Sold in sets of two, these longer 34-inch pads provide a layer of foam cushioning in transit.

" [ 86cm ] - Set of two

• Custom extruded foam fits square or round crossbars
  
  
• Durable UV resistant 600D polyester fabric
  
  
• Hook and loop closure
  
  
• 65% Polyester, 14% Neoprene, 13% Nylon, 7% Spandex, 1% Polyurethane

Dakine Aero Rack Pads X-Large

34" 86.5cm

MUST-HAVE RACK PADS FOR KEEPING YOUR BOARD SAFE ON YOUR ROOF RACK

Padding where you need it. These aero rack pads put plenty of padding against your board while leaving a more aerodynamic profile under the crossbar than a traditional pad. Easy to use hook-and-loop closure secures them in place. The XL width is designed for larger SUVs and truck racks. The heavy-duty build handles the wear and tear of sun and weather.

Fits wider/ thicker rack cross bars

Only pads top of bar for sleek fit

Durable UV resistant 600D polyester material

Hook and loop closure

34" / 86.5cm long pad - Set of two.

Curve Sup Sling fits  25" up to 32"

Struggling with handling and carrying your SUP? Save your energy for paddling with a Curve SUP Sling!

The Curve SUP sling is a pre-shaped sling that fits easily and quickly around any 'naked' Stand Up Paddleboard providing practical handles and shoulder strap - with a simple 2 step closure in seconds - no buckles required. 

The sling adds handling and carrying performance to your SUP at a minimal weight. Handling is improved via multiple grab handles while carrying functionality is provided via the shoulder strap. 

Strategic padding zones add comfort while carrying and rail protection while resting the board. 

Large pocket provides storage for essentials such as wetsuits and towels. 

NO buckles to break or dent your board

NO straps to get tangled

The SUP sling is also compatible with Curve boardcarry backpacks for greater carrying performance.

How to carry a Stand Up Paddle Board without a SUP handle?

• the SUP Sling Carrier fits Stand Up Paddle Boards for easy SUP carry
• easiest sling to use - no fiddly buckles or straps to get tangled!
• two step velcro closure, attaches tight around your board in seconds!
• easy handling with 3 grab handles and shoulder strap
• padded adjustable shoulder strap with super strong buckles
• paddle grips secure your paddle for hands-free carry
• strategic padded zones boost rail protection and hip comfort with 10mm padding
• two sizes: Standard for SUP's up to 32", and Large for SUP's 33" and wider
• large pocket stores wetsuits, towels and gear with mesh for drainage
• constructed from hard wearing 600D polycanvas

two size options

• Standard size fits all SUP's from 25" to 32" wide

Features:

• SUP soft racks feature super secure LOCKDOWN single loop system which cocoons around Stand Up Paddle Boards eliminating lift, slide and flutter
• 25mm foam padding protects vehicle roof
• *new* 25mm protective foam now extends to cocoon around SUP rails and prevent strap on rail damage!
• inside neoprene layer protects boards
• 3 connection options: thru-doors, loadbars or gutters/sills
• quick and easy to use with single tightening point
• easy board access via top load hook
• webbing doesn't run along roof reducing potential vibration damage
• fit 99% of roofed vehicles on the market
• constructed from 600D polycanvas, neoprene, 1" foam and quality metal components
• includes utility bag
• capacity: 1-2 SUP's 

SUP Wall Rack Triple Aluminium by Curve

NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)

Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 15kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

Features

• super resistant to rust and corrosion
• super strong & durable aluminium construction
• sleek sliver finish
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 3 Stand Up Paddle Boards
• arm length 59cm, base height 54cm, space between arms 20cm
• Curve 12 month guarantee

Thule Wall Hanger

Get your gear off the floor with at Thule Wall Hanger

• Load capacity 40 kg.
• Does not fit the Thule EasyFold bike carrier.

Curve Triple SUP Steel Rack

Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)

Precision engineered from a multi stage anti corrosion process, this pair of Curve steel Triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty steel tubing that has been powder coated and treated to provide excellent rust protection.

Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

Super durable and super strong these racks will take a board that weighs 20kg no problem.

Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space

Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.

Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

Capacity Easily supports 3 standup paddle boards up to 20kg each with fins left on (plenty of space between levels)

Got 2 or 4 boards? Check out our Double and Quad SUP rack options...

Features

• multi stage anti-corrosion process
• super strong & durable steel construction
• powder coated in black
• arms set at 10 degree incline to make boards extra secure and easy to load
• protective EVA foam padding for board protection
• easy installation - arms insert with a simple push pin
• set includes pair of two racks plus installation screws
• stores 3 Stand Up Paddle Boards
• arm length 68cm [27"], base height 66cm [26"], space between arms 30cm [12"] 
• Curve 12 month guarantee