Standard Box
The new FCS II Longboard fins use the same keyless technology as the new FCS II fins. So you can easily swap out your fin in the middle of a session with out missing lots of wave. Furthermore the system works with most longboard fin boxes so no need to get a new box for your board.
-
FCS II Skindog PC 7" Fin
Designed in collaboration with UK longboard champion Ben Skinner, this 7-inch upright center fin features ultra-lightweight AirCore construction and is designed as a perfect all-around option.
Overview
Ben Skinner’s Signature Longboard template
Complimenting his highly technical Thunderbolt range the template offers a balance of drive and hold, enabling enough pivot to execute tight turns and more radical manoeuvres.
Recommended for single fins and mid-lengths. Combine with Skindog side bytes for added performance & control in powerful surf.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.00 -
The Tiller 9” is a modern spin on a classic favorite. Made with Volan fiberglass, this fin offers a unique flex pattern due to higher fiberglass to resin ratio. With a large base for holding your line and a thinned tip for added responsiveness from rail to rail, the Tiller is a great template for your favorite mid-length, egg, log or 2+1. This timeless flex fin is offered in 8”, 9” & 10” to really customize your ride.
- Template Category | Flex Template
- Construction | Volan Fiberglass
- Size | Large Longboard
Center Fin Area 32.90 Height 9.00 Base 7.10 Foil SYMM $179.00 - Template Category | Flex Template
-
FCS II HATCHET PG LONGBOARD FIN
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
Ideal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.95 -
FCS2 Kelia Moniz PG Longboard Fin 9.75"
Kelia Moniz's new Longboard Fin. Featuring a classic template, perfect for cruising, driving off the bottom & arching through turns.
Kelia Moniz's Longboard Fin
Being one of the most stylish surfers to ever grace a longboard, it was paramount for us to develop a fin with the Hawaiian World Champ that would allow her total freedom of expression and creativity in the water.
With a nod to George Greenough, this template is a classic well-balanced fin for controlled trimming, driving steadily off the bottom and smooth arching turns.
Made from Performance Glass in a colour pallet personally picked by Sis, this 9.75” fin is suitable for most traditional longboards.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.95 -
Fcs2 Thomas Bexon Signature Fin - Volan
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
Fcs2 Thomas Bexon Signature Fin - Bloom
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box require
$189.00 -
FCSII Pivot Performance Glass Fin - Charcoal Grey
Overview
- Pivot in the pocket, lock the rail on the wave face and run the nose.
- Upright fin with minimal sweep and base.
- Loose fin for performing tighter turns.
- Bigger sizes ideal for logs and nose riding (9" + 10").
- 2 + 1 Compatible.
- Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$199.00 -
FCS2 Kelia Moniz Longboard Fin 9.75"
NEW SEASON COLOUR
Kelia Moniz's new Longboard Fin. Featuring a classic template, perfect for cruising, driving off the bottom & arching through turns.
Kelia Moniz's Longboard Fin
Being one of the most stylish surfers to ever grace a longboard, it was paramount for us to develop a fin with the Hawaiian World Champ that would allow her total freedom of expression and creativity in the water.
With a nod to George Greenough, this template is a classic well-balanced fin for controlled trimming, driving steadily off the bottom and smooth arching turns.
Made from Performance Glass in colours personally picked by Sis, this 9.75” fin is suitable for most traditional longboards.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
FCS II Thomas Longboard Fin - Flame
NEW SEASON COLOUR 23/24
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Overview
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that flexible fins can give at times." - Thomas Bexon.
Performance Glass
Performance Glass (PG) fins are machine-cut from layers of solid fiberglass. These fins are stiff and are widely used by pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid-surf.
- Easily insert or remove your fin in seconds. No fin key is required.
- Designed to be used in most existing Longboard boxes. No new box is required.
$189.95 -
FCS II Flow Performance Glass 10.5" Longboard Fin - Mango
Single fin designed for controlled flowing turns.
Overview
- Drive hard off the bottom and perform controlled flowing turns.
- Neutral fin with elongated base.
- Provides excess drive and hold for longer turns and trim stability.
- Suited to a more laid back style of longboarding.
- Designed to be used as a single fin.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.95 -
FCS II Christenson Longboard Fin - Blood Red
NEW SEASON COLOUR 23/24
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Overview
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$199.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$319.00
