Fcs2 Carver Performance Core Tri Fins - Acid Black

Powerful, drawn-out turns. Excels on open face waves.

Overview

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Reactor PC Tri Fins - Charcoal/Black

FCS II Accelerator PC Tri Fin Set

FCS II Carver PC Tri Fin Set - Eucalyptus

 

Powerful, drawn-out turns. Excels on open-face waves.

Overview

Designed for powerful, drawn-out turns with added hold.

An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.

Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.

Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area  (mm)	Sweep Deg°	Foil
MED	4.47	113	4.54	115	14.96	9650	37	Flat
LRG	4.58	116	4.66	118	15.73	10150	37	Flat
XL	4.69	119	4.77	121	16.51	10650	37	Flat

 

 

 

Speed ​& tight turns. Ideal for beach breaks.

Overview

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Performer PC Tri Fin Set - Mango

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCS II Performer Performance Core Tri Fin Set - Tranquil Blue

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCS II Reactor PC Tri Fin Set - Charcoal/Black

Fcs2 Julian Wilson Tri Fins - Army Camo

Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.

Overview

• Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
• Updated in PC construction featuring our ultralight AirCore.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Speed & tight turns. Ideal for beach breaks.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Balance of speed, flow and response. Suitable for all conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• New Linear Flex: 3D Twist and roll action delivers a smoother feel.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core Carbon

Our new PC Carbon construction with ‘Linear Flex’ produces a 3D twist & roll action resulting in a fast, super responsive fin that feels much smoother through turns. PCC fins suit fast surfing and are favoured by more advanced surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Speed, flow and response with added control. Excels in critical conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response with added control.
• Oversized, all-round template with a fuller tip.
• Ideal for surfers who like to attack the wave and perform aggressive turns.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Al MerricK Performance Core Tri

Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.

Overview

• Al Merrick's template is designed for radical, progressive surfing.
• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
• Updated PC construction featuring our ultralight AirCore.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. 

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Performer Neo Glass Tri-Quad Eco Fins