Protective, lightweight reefwalkers great for use in all wet domains. Featuring mesh water flow panels these quick drying shoes are great for beach / reef walking. *Mens footwear sizing.

This 1mm split toe bootie folds away into your pocket to get you in and out across the reef! So you can surf in bare feet. For sizing we have found it is best to go up 2 sizes.

The O’Neill R&D team at Area 52 have developed another product to allow you to perform in the most extreme elements and excel in the coldest climates.

Features.

Split Toe Minimal Design.
Anti-Flush Shin Strap.
Durable Krypto Forefoot.
Fluid Foam Neoprene with Rubber Foxing Outsole.

The Rip Curl Reefer boot is a warm water/tropical boot that you can wear surfing but won't overheat your feet. A durable outsole and neoprene/mesh upper provides durability, protection, and comfort.

Features

• Mesh water flow panel
  
  
• Compression strap / Barrel lock closure
  
  
• Reef protective sole and pull on heel strap
  
  
• 1.5mm split toe

Lightweight split toe reef bootie with adjustable Velcro ankle straps, and a pull cord/barrel lock combo for a better seal. Higher cut cuffs cover and protect your ankles. A solid sole underneath the split toe means no annoying leash hangups.

Flexible, high performance boot design for enhanced range of motion.

The liquid dipped Rip Curl Rubber Soul offers the ultimate in performance and water tight seal. This boot is a minimalist's dream. Lightweight, warm, water tight, and durable.

Features

• Liquid neo coating
  
  
• 100% waterproof seal
  
  
• Easy Slide on System (SOS)
  
  
• 2mm split toe

Features.
3mm sealed seams.
Internal split toe.
Contour flex panelling.
Full ZG400 superflex neoprene.
Adjustable free floating arch strap.

Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.

Features.
Split Toe.
Heel Cinch.

Billabon Furnace Ultra surf boots are designed using the latest high tech materials for the lightest, warmest and most flexible surf boots available.

Features

• Furnace carbon fibre – warm
  
  
• Sensor sole - feel your surf board
  
  
• Fully sealed seams – water tight
  
  
• Cutaway arch - flex
  
  
• Dry-max cuff - water tight
  
  
• Adjustable straps – secure

O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black

Xcel 3mm Infiniti Boots

• Thermospan 3mm lined upper boot for warmth
   
• Nylon-2 lined sole for traction
  
  
• Flex horizontal heel support
   
• Ultra Stretch ankle panel w/ pull loop for easy on & off
  
  
• Sole at split toe is solid so no leash hang-ups
   
• Heel and toe support
  
  
• Velcro cinch across instep
  
  
• Glued and blind stitched construction
  
  
• Taped seams

Features

• 3mm with Flash Lining
  
  
• Stitchless compression strap
  
  
• Easy Slide on System (SOS)
  
  
• Supersoft sole, pull on heel strap
  
  
• Velcro shaft closure

Features.
Plush thermo lite = warmth.
Quick dry fibers = stay dryer.
Pull up ankle loop = easy entry.
Single rubber bottom = board feel.
Taped seams = durability.
Engineered design = contoured fit.

The Flashbomb boot features the Rip Curl exclusive .8mm single layer sole that provides the ultimate board feel without compromising durability. This boot has all of the high end features you need.

Features.
New E5 tape providing increased stretch for easy entry increased seam seal.
Anti stink anti microbial technology embedded in the fabric that kills odour caused by bacteria.
Worlds first super thin sole single layer 0.8mm sole for ultimate feel without compromising durability
Rubberized structure increased support without loosing feel.
Stitch-less compression strap minimizing water entry and reduced lateral foot movement.
Slide on system (SOS) inbuilt achilles strap that stops bunching, helping the boot slide on more easily.

O'Neill Defender Split Toe 3mm Wetsuit Boot - Black

Billabong Furnace Hidden Split Toe Wetsuit Boots 3mm - Black Clay

Rip Curl Flashbomb Hidden Split Toe Bootie 3mm

 The Flashbomb 3mm Hidden Split Toe Booties were made to withstand the coldest water winters, keeping you warmer in the water longer. These booties were constructed with our signature Flash Lining technology for warmth, flexibility and fast dry times. Finished with the SOS Entry System, Super Thin Sole with textured grip, new E5 Tape and a stitchless compression strap - all with a durable rubberized outsole structure.

• Ankle and foot strap
  
  
• Slide on easy S.O.S. system
  
  
• Textured grip print
  
  
• Anti-stink treated
  
  
• Seam sealed

Rip Curl Flashbomb 3mm Narrow Hidden Split Toe Booties

Nothing worse than icy, numb extremities! With the Flashbomb 3mm Booties you can surf to your hearts content and stay warm and connected to your board for longer. Featuring flash lining for quick drying, you'll never have to put on a soggy boot again. Seam sealed, easy to slide on, and finished with an odour-phobic treatment that keeps them smelling sweet.

• Flash lining
  
  
• Stitchless compression strap
  
  
• Supersoft sole
  
  
• Easy slide on system
  
  
• Cold water

We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:

3D-Molded Natural Rubber Sole

Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole 

Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.

Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior

Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.

EZ-O Cuff with Overkill Seams

Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption. 

Split-Toe Heat-Booster Socks in the Box

The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

1. Makes boots easier on-off and reduces stress on seams.
2. Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
3. Adds warmth to extend session length and comfort.
4. Absorbs excess water from flushing to prevent puddling in the boots.
5. Absorbs bacteria to reduce bootie-stink.
6. Machine wash and dry for convenience.

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more. 

Everything You've Always Wanted in a Boot...and Less.

It's simple. Solite's 2020 3mm Custom is the lightest, most high-performance piece of aquatic footwear in the world. Solite's most affordable Custom Series crushes competitor's top-of-the-line boots with instant response, barefoot feel, unmatched durability, and a perfect custom fit that makes you forget you are wearing booties.

Solite's ongoing obsession with improving their products led to a completely redesigned neoprene upper on the Custom series, featuring our exclusive "EZ-O" cuff. The EZ-O cuff is a seamless O-ring against the leg, a design proven to greatly reduce water entry. Unlike other O-Ring designs, the EZ-O features a much larger neoprene panel, allowing more stretch in the opening and making the boots easier to put on and take off.

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.

Recommended Water Temps: 50-60F.

Key Features/Benefits

• Heat-moldable with boiling water for the perfect custom fit.
• Patented seamless Thermo-Form sole for next-level comfort, warmth, dexterity, and durability.
• Internal split-toe locks your foot inside the boot for precise response.
• Super-tacky and flexible 1mm vulcanized rubber sole pods for barefoot board feel, grip, and abrasion resistance.
• 3mm mid-stretch neoprene upper with GBS (Glued/Blind-Stitched) seams and external LSS (Liquid Seam Seal).
• NEW EZ-O cuff for improved flush-seal with easier on-off than traditional O-ring seal.
• 3D silicone-print cuff band reduces stretch and grips wetsuit leg to fight flushes.
• NEW softer two-tone plush quick-dry lining retains heat with improved air-flow and comfort.
• Includes a pair of knit Solite Heat Booster socks for added warmth, comfort, and easy on/off.