O&E Happy Hour Epoxy/Soft Board - Sky Blue

The Happy Hour is all about fun with an edge! Suprising all round performance with the stiffness of an epoxy board plus the benefits of a durable soft textured deck. Narrower pin tail for performance. Wider nose area for easy paddling. Minimal rocker for easy paddling to catching waves. 

Mick Fanning Catfish - Grey

The Mick Fanning Cat Fish is fast and super fun! Inspired by the speed and flow of boards from the experimental 1970’s where there were no rules!

Now available in Modern's  Epoxy Soft construction for more fun. With the Modern Highline we wanted to design a board that would give novice-to-intermediate surfers as much assistance as possible.

To become a better surfer and build your confidence, you need to catch as many waves as possible. There aren't any shortcuts but we think we can help shorten the learning curve. So we designed this board to be very buoyant (easy to paddle), stable (easy to get to your feet), and easy to control (smooth turns and go where you want on a wave).

Essentially, Modern built this board to re-define the first steps in surfing so people develop their skills quicker, build confidence and maximise the enjoyment they get from riding waves.

OUTLINE: The outline is the key to the Highline’s amazing stability. We basically took the middle section of a longboard, then tapered the nose to a semi-point and added a nice curved square tail, and by reducing the overall board length you maintain easier side-to-side turning.

ROCKER: Considered flat, the low, fish style rocker means this board paddles very quickly onto waves, and will maintain its speed once you’re up and riding. In this case flat equals flow, and less effort required from the rider to get the board up and going.

CONTOURS: Forward concave helps channel water efficiently across the flatter rocker, particularly when paddling and taking off. The back half of the board has a raised vee with double concave to offset the width, and allow for easier transitions from one rail to the other when performing turns.

FOIL: There’s lots of volume along the full length of the foil, but enough taper through the nose to avoid that ‘boat-like’ feel. The rails are full, but still soft which makes them forgiving as you glide across the face and connect your turns together.

PERFORMANCE: This model can be ridden shorter due to the extra width and higher volumes, which is a big advantage for beginner and intermediate surfers developing their turning skills. For better surfers, gear down into cruise mode before riding the Highline. It has a large sweet spot and offers a very fluid ride, especially in smaller, soft running beach and point waves.

Epoxy Soft - ES

The Epoxy Soft Construction is a real game changer in the soft surfboard market. When you break it down it's a multi layer construction that comprises of a PE deck skin that is supported by a thin wood veneer layer that is housing a epoxy resin and fibreglass wrapped machine shaped EPS core. The bottom layer is a High Density PE skin. When you add it all up it gives a high level of performance with a fun soft board feel.

Mick Fanning Super Soft Tri- White

Softech The Triplet 5'8"

A combo of fresh and old school. The perfect board for fast and steezy surfing.

Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L 

A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.

Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.

• Vacuum glassed with 6OZ. cloth
• High density PE foam deck
• Ultra-thin soft HDPE slick bottom

Size: 5'8" / 6'0" / 6'3"
Dimensions: 5'8" x 20 1/2” x 2 7/16”,  6'0" x 21 1/8” x 2 3/8”,  6'3" x 21 1/4” x 2 3/4”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L

+ Leash Plug installed
+ FCS II Softflex Fins included

O&E Ezi Rider Soft Board - 8'0"

Summer fun for the whole family. The Ezi-Rider 8'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.

MIDDLE - CORE/ STRINGERS
EPS (Extruded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included). 

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

Features:

• Length: 8'0

• Width: 22 3/4"

• Thickness: 3 3/4"

• Volume: 80L

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <110k

Ocean & Earth Ezi Rider Softboard 8'0

Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

Features:

• Length: 8'0

• Width: 22 3/4"

• Thickness: 3 3/4"

• Volume: 80L

• Board Weight: 5.87 Kgs

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <110kg

Mick Fanning Kuma Fish

The World Surf League (WSL) x MF Softboards Global Shaper Challenge was conceived to raise awareness of the creatives who are the heart and soul of the sport of surfing as part of the WSL's #StayLocal campaign, which shines a light on the world's best surfers supporting their local surf communities and inspiring surfers everywhere to do the same.

Shapers, designers and creatives from all surf regions globally were invited to enter a CNC file and softboard design concept and the response was overwhelming.

Four designs were selected through a public vote via the WSL Instagram story to progress to the final.

Designs from Alex Crews @acsod, Axel Lorentz @pukassurf @axellorentz, Mitsunori Kumagai @kumasurfboards and Gerardo Candelaria Perez @cevichesurfco were produced utilising MF Softboards production process which is the global bench mark for performance softboards.

Along with the four finalists Mick also selected two entries to move directly into the final. The wildcards are Duke Aipa @aipasurf and Kamalei Woolsey Alexander from @modernhawaiiancollective.

Starting with the CNC file that each designer submitted during round one of the competition we milled their design from an EPS blank. Once the EPS core was finish shaped our Hybrid Carbon Spine and Epoxy Shell construction was utilised to ensure maximum performance in the water.

All six boards were delivered to Mick for him to put them through their paces on the peeling righthand walls of his home break Snapper Rocks.

Mitsunori Kumagai

Gold Coast Australia

"Great Small Wave Catcher" The Flat deck makes increases the volume to help catch waves and provide more speed in poor conditions, A Slight forward placed concave bottom with a deep exit Vee that increases the tail rocker. This board is incredibly fast and finds hidden pockets of speed on waves. Enjoy..............."

Mitsunori Kumagai is KUMA surfboards shaper. He was born and grew up in Japan. In 2005 Kuma decided to move to Australia to pursue his passion of surfing and make surfboards. His first board was shaped in a garage at a rented house. Since then he has been shaping surfboards for 15 years.
His winning design was a 5'6 x 20 1/16 x 2 3/8 29.38L

Full sizes are:
5'4 (27.63L)
5'6 (29.52L)
5'8 (32.74L)
5'10 (36.15L)
6'0 (43.27L)

The Beastie has been designed to be the ultimate fun board the volume is really well distributed for such a large board, the outline is generous providing a stable platform for catching waves perfect for those looking to progress their surfing to the next level or for the surfer looking for an alternative to a longboard.

The tail width provides lift and acceleration in the weakest waves creating a super generous sweet spot!

SIZING:

6’0 x 20 x 2 5/8  37.01L

6’6 x 22 x 2 3/4 46.19L

7’0 x 22 x 2 3/4  50.05L

7’6 x 22 5/8 x 2 7/8 57.51L

8’0 x 22 5/8 x 2 7/8  61.52L

Softech The Triplet 6'0"

A combo of fresh and old school. The perfect board for fast and steezy surfing.

Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L 

A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.

Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.

• Vacuum glassed with 6OZ. cloth
• High density PE foam deck
• Ultra-thin soft HDPE slick bottom

Size: 5'8" / 6'0" / 6'3"
Dimensions: 5'8" x 20 1/2” x 2 7/16”,  6'0" x 21 1/8” x 2 3/8”,  6'3" x 21 1/4” x 2 3/4”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L

+ Leash Plug installed
+ FCS II Softflex Fins included

Gnaraloo Beach Cruiser surfboards provide the ultimate in fun and safety for beginner surfers. Theses boards are incredibly buoyant, stable, and easy to ride.

With an emphasis on safety and durability, the Beach Cruiser feature a thick Polyethylene deck and a soft slick skin on the bottom surface that’s tough enough to take a beating, yet is soft enough to keep beginners safe.

The secret to the performance of these boards lies within the core. An embedded plywood stringer system maintains the integrity of the rocker while providing a stiff, stable platform. This lets you paddle onto waves with minimal effort and feel confident once you’re on your feet.

These surfboards are designed to withstand the toughest of treatment, making them ideal for surf schools. The vacuum construction process eliminates hard or sharp surfaces, and prevents peeling or bubbling. A reinforced tail zone also provides added protection.

Available in a variety of sizes from 9 foot right down to 6’0″. Each board comes fitted with a convenient carry handle and an easy-to-use fin system complete with flexible thruster fin set.

Softshell Construction

Boards with Soft Shell construction feature much more technology then the eye can see. They are a combination of materials designed to allow the board to perform to the highest levels given the constraints of the flexibility of the materials. All boards feature an integrated Fin System, 2 or 3 Wooden Stringers depending on the size of the board to ensure the board is stiff enough. A light weight EPS core combined with a PE foam layer on the deck and a High Density PE Slick that is mounted to a thin PE Foam layer on the bottom give the board an awesome feel in the water. Soft enough not to hurt should you fall on it but hard enough to handle the power of the waves.

Critical Slide Fun Guy Epoxy Soft -Plein Air

The Epoxy Soft construction makes the Fun Guy a magical board to surf, offering a smooth ride for every skill level. This model is classified as a fun board which is fitting in the sense that it will paddle superior to others in the line up, feel comfortable under your feet & gather speed easily too, hence increasing the fun when taking the fun Guy for a paddle.

There is a performance element to this model to however, single/double concave for speed & moderate rockers through out to give you the option of turning in more critical parts of the wave. Don’t let the soft exterior fool you this board will take you where ever you want to go on a wave.

OUTLINE: Classified as a fun shape, the outline is full and generous from nose to tail providing maximum stability on small to medium size waves. The rounded nose keeps the area up front and allows the rider to comfortably shift their weight forward. The slight taper through the tail lets you maneuver the board with ease.

ROCKER: Low, relaxed rocker makes this board paddle onto waves really well, accelerate from the take off with minimal effort, and allow for flowing turns on the face of the wave.

CONTOURS: Vee-to-double concave bottom makes for easy rail-to-rail transitions and offers control when driving off the tail.

FOIL: Designed with plenty of volume in the nose and tail, and out towards the rails, which provides added stability and makes this board simple to ride for surfers transitioning from the wastewater to unbroken waves.

FINS: Fitted a two plus one set up. with FCS II side plugs makes installing and removing fins quick and convenient. that’s easy to ride and control.

The Epoxy Soft Construction is a real game changer in the soft surfboard market. When you break it down it's a multi layer construction that comprises of a PE deck skin that is supported by a thin wood veneer layer that is housing a epoxy resin and fibreglass wrapped machine shaped EPS core. The bottom layer is a High Density PE skin. 

Salt Gypsy Mid Tide ES - Hot Mango

The Epoxy Soft construction makes the Salt Gypsy Mid Tide epoxy softboard a magical surfboard offering a smooth ride for every skill level. This model is classified as a fun board which is fitting in the sense that it will paddle superior to others in the line-up, feel comfortable under your feet and gather speed easily too, hence increasing the fun when taking the Mid Tide for a paddle.

The generous outline (shape) and ‘easy on the eye’ curves mean this board strikes the perfect balance between drawing long smooth lines in cruise mode and banking a nice turn on the open face.

Think easy paddling, lots of stability and enough turning response to satisfy the savvy Salt Gypsy wanting to really wet the rail.

All ages, all conditions… The Mid Tide is basically an all-round cruiser that will adapt to the rider’s ability.

*All Salt Gypsy surfboards were tested and designed with appropriate dimensions and volume allocations to suit female surfers so they can get the most out of every wave.

Mick Fanning Twin Town - Cedar

Softech The Middie 6'4"

Softtech surfboards are handmade from highly durable materials, and constructed using proven manufacturing techniques, Softech surfboards are built to withstand the toughest of treatment and are available in a range of styles to suit the beginner through to the most experienced rider.

NEW SEASON DESIGN

A well rounded board. Suited to all-round conditions or for beginners looking for an easier way to catch waves.

Volume: 5'10": 28.5L | 6'4": 37.5L | 6'10": 45.5L | 7'4": 58L

Ocean & Earth Ezi Rider Softboard 9'0

Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

• Length: 9'0"

• Width: 24"

• Thickness: 3 5/8"

• Volume: 93L

• Board Weight: 7.33kg

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <130kg

Softech The Triplet 6'3"

A combo of fresh and old school. The perfect board for fast and steezy surfing.

Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L 

A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.

Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.

• Vacuum glassed with 6OZ. cloth
• High density PE foam deck
• Ultra-thin soft HDPE slick bottom

Size: 5'8" / 6'0" / 6'3"
Dimensions: 5'8" x 20 1/2” x 2 7/16”,  6'0" x 21 1/8” x 2 3/8”,  6'3" x 21 1/4” x 2 3/4”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L

+ Leash Plug installed
+ FCS II Softflex Fins included

Mick Fanning Beastie - Sky

Mick Fanning Beastie - Coral

Mick Fanning Little Marley - Sky

Short, wide, fast and fun the Mick Fanning  Little Marley has a short rail line that fits perfectly into the smallest pocket.

The small curvy outline helps in the weakest of beach breaks by decreasing drag and increasing speed which is the key to this little pocket rocket. 

A single to double concave allowing full control at speed, the subtle diamond tail provides multiple pivot points for turning in the most critical sections of dumpy little shore breaks.

• 5 Fin Boxes Ships With FCSII SoftFlex Performer - Thruster Set ONLY
  
  
• DECK: 2 x 6oz + 4mm IXPE Soft Skin BOTTOM: 6oz + 4mm Slick Skin HDPE

Modern Double Wide EpoxySoft Surfboard - White

 What happens when you take a longboard and make it shorter, and re-distribute the foam into the outline and thickness? Answer, you get the Modern Double Wide. This high volume mid-length surfboard offers great stability and exceptional paddle power for beginner-to-intermediate surfers.

Having maximum surface area gives this surfboard amazing side-to-side stability so it’s perfect for beginner and intermediate riders as they jump to their feet.

CONTOURS: Flat through the nose helps with early entry into softer waves, vee into double rolled concave in the back half of the board means more capable riders can still make flowing directional changes.

ROCKER: Relaxed through the entire length of the board with gentle lift in the nose and tail. This allows the board to paddle exceptionally well, catch waves easily, and maintain forward flow even in the white-water, while still allowing the board to turn in a smooth arc.

FOIL: Boxy rails and a high-volume foil from nose-to-tail means this board will sit high on the water making it perfect for maintaining speed and distance in smaller conditions.

Available in three key sizes, the Modern Double Wide is perfect for anyone looking for the stability and paddle power of a longboard in a more manageable size board. NOTE: Rider weight is based on board volume and intermediate rider skill level

Now available in Modern's Epoxy Soft construction for more fun. With loads of surface area up front, and a more tapered outline in the tail, the Modern Love Child is a versatile cruiser that is sure to double your wave count. This surfboard paddles exceptionally well, has plenty of turning ability off the tail, and will adapt as the conditions, and your approach changes.

OUTLINE: The longboard outline up front creates a huge stable zone under the front foot and chest, which is great for catching waves early and riding forward towards the nose. The tapered area pintail keeps the board manoeuvrable and adds control in bigger, steeper waves.

ROCKER: The low rocker is designed to glide effortlessly into waves and maintain down-the-line speed and acceleration. The subtle lift in the tail rocker promotes smooth gliding turns on the face.

CONTOURS: Pronounced vee-double concave starts under the front foot and runs all the way out the back maintaining ample manoeuvrability on an otherwise wide, higher volume board.

FIN: Three different fin configurations offer 3 types of performance. The single and 2 + 1 set-ups deliver a free-flowing ride while promoting longer lines. The quad offers a faster ride with tighter turning capacity.

Epoxy Soft - ES

The Epoxy Soft Construction is a real game changer in the soft surfboard market. When you break it down it's a multi layer construction that comprises of a PE deck skin that is supported by a thin wood veneer layer that is housing a epoxy resin and fibreglass wrapped machine shaped EPS core. The bottom layer is a High Density PE skin. When you add it all up it gives a high level of performance with a fun soft board feel.